Overview
The Fabtech FTS94010 is a joint rebuild kit in the control arm category, sold under part number FABFTS94010. Rebuild kits replace the wearing parts of a control arm joint so the joint can be restored without replacing the whole arm.
It is a universal fit kit. Match the joint size and arm type to your control arm before ordering, and check the contents against your installation before starting.
Choosing a rebuild kit
A control arm joint wears through use. The usual signs are play at the joint, clicking or knocking over bumps, and uneven tire wear. A rebuild kit supplies replacement parts to restore the joint, which can cost less than a full arm when the arm itself is still sound. Before buying, inspect the arm for bends or cracks, since a rebuild cannot repair a damaged housing.
Match the kit to the joint’s physical size and to the way the arm mounts to the axle or frame. Rebuild kits often arrive as a set of seals, boots and the joint itself, so compare what you already have against the contents before starting. Pressing a new joint into an arm usually needs a press or a shop tool, and the work goes faster when the old joint is removed cleanly.
After a rebuild, grease the joint, check the boot for splits, and recheck the joint after the first few trail runs. Alignment can change after joint work, so have the front end checked if the tires begin to wear unevenly.
- Play or looseness at the joint
- Torn or cracked boot
- Clicking or knocking over bumps
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABFTS94010 |
| Product type | Joint rebuild kit |
| Category | Control arms |
Vehicle fitment
It is not built for a specific vehicle. Match the joint size and arm type to your control arm before ordering.
Confirm your vehicle’s year, model and trim before ordering.









