Overview
The Fabtech FTS94009 is a joint rebuild kit with universal fit. Confirm the vehicle, model year, joint size and kit parts before ordering, since the joint must match the suspension it is used on.
A rebuild kit restores a worn joint rather than replacing the whole arm or link. A rebuild usually covers the parts that wear, such as the bearing, seal and boot, and it depends on the joint design. Check the contents and joint type against your installation before starting.
Key features
- Joint rebuild kit
- Confirm fit for your vehicle’s year, model and trim before ordering.
- Part number FABFTS94009
- Check the package contents against your installation before starting.
- Brand: Fabtech
Rebuild or replace a worn joint
A worn joint shows play when the arm is moved by hand, a torn or split boot, grease leaking from the seal, or a clunk over bumps. Before deciding on a rebuild, remove the old grease and inspect the ball and socket for pitting, scoring or looseness. If the bearing surface is damaged, a rebuild will not restore the joint and replacement is the better choice.
A rebuild works best when the ball and housing are sound and the boot and seal are the only failed parts. Install new parts in the order the procedure requires, and use a grease that suits the joint. After the joint is back together, check for free movement and set the alignment, since the joint position controls the wheel angle.
- Play in the joint by hand
- Torn boot or leaking grease
- Pitting or scoring on the ball
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABFTS94009 |
| Type | Joint rebuild kit |
| Fitment | Universal fit. |
Vehicle fitment
Fit depends on the joint in your suspension. Confirm fit for your vehicle’s year, model and trim before ordering.
A joint rebuild kit has to match the joint in the suspension it is used on, so the vehicle should be confirmed before ordering.
Installation notes
Before a joint is rebuilt, the play in the joint should be checked, and the old grease and the worn parts should be removed. A joint that has play or a torn boot should be replaced if the rebuild is not possible. The rebuilt joint should be checked for free movement and for correct torque after installation, and the alignment should be set after any control arm or link work.
What’s included
Confirm the parts in the box before starting, so nothing is missing from the joint rebuild.









