Flex Joints, Rod Ends & Jam Nuts
Showing 37–48 of 116 resultsSorted by popularity
-
-
Rod Ends, Heim, Johnny & NG Joints
RockJock 9/16 Inch Greasable Bolt with Hardware – CE-91107
- RockJock 4×4 9/16 inch greasable bolt with hardware, part number R/JCE-91107
- 9/16″ fine thread for 2 1/2″ Johnny Joints
- Zerk fitting installed in the bolt head
- Includes two flat washers and a crush nut
SKU: R/JCE-91107 -
Rod Ends, Heim, Johnny & NG Joints
RockJock 5/8″ Greasable Bolt with Hardware – CE-91108
- RockJock 4×4 greasable bolt with hardware, part number R/JCE-91108
- 5/8 inch fine thread, 4 inch long
- Grade 8 zerk fitted bolt with 2 flat washers and a stover nut
- Used to grease Johnny Joint rod ends, usable in other applications
SKU: R/JCE-91108 -
Rod Ends, Heim, Johnny & NG Joints
RockJock 2.5″ Narrow Forged Johnny Joint with 7/8″-14 RH Thread (2.625″ x .562″ Ball) – CE-9117N
Rod Ends, Heim, Johnny & NG JointsRockJock 2.5″ Narrow Forged Johnny Joint with 7/8″-14 RH Thread (2.625″ x .562″ Ball) – CE-9117N
- RockJock 4×4 narrow forged Johnny Joint rod end, part number R/JCE-9117N
- 7/8″-14 right hand threaded shank, fully assembled
- 2.625″ wide ball center with 9/16″ thru bolt hole
- Externally greasable through a zerk fitting
- Forged steel with gold zinc plating
SKU: R/JCE-9117N -
-
Rod Ends, Heim, Johnny & NG Joints
RockJock 2.5 Inch Johnny Joint – CE-9114L-14
- RockJock 4×4 R/JCE-9114L-14, forged male rod end Johnny Joint
- Universal fit; no specific vehicle is listed
- 7/16″ thru bolt hole, 2″ mounting width, greaseable and serviceable
- 3/4″-16 threads, 2 1/4″ long on the shank
- Gold zinc plated finish
SKU: R/JCE-9114L-14 -
Rod Ends, Heim, Johnny & NG Joints
RockJock 2.5 Inch Johnny Joint – CE-9110P-14
- RockJock 4×4 R/JCE-9110P-14, a 2.5-inch weld-on Johnny Joint kit
- 30 degrees of movement in any direction
- DOM tube outer shell with high-density urethane bushings
- 9/16-inch thru bolt hole and 2 5/8-inch mounting width
- No vehicle named; made for fabricated suspension builds
SKU: R/JCE-9110P-14 -
Rod Ends, Heim, Johnny & NG Joints
RockJock 2.5 Inch Forged Johnny Joint with 1-1/4 Inch RH Threaded Stud – CE-9114-14
Rod Ends, Heim, Johnny & NG JointsRockJock 2.5 Inch Forged Johnny Joint with 1-1/4 Inch RH Threaded Stud – CE-9114-14
- RockJock forged Johnny joint, 2.5 inch, 1-1/4 inch right-hand stud
- Greaseable through the outer shell, 7/16 inch thru bolt hole
- Accepts Johnny joint internals; fits RockJock adjustable upper arms
- Gold zinc plated, sold each
SKU: R/JCE-9114-14 -
Rod Ends, Heim, Johnny & NG Joints
RockJock 2.5 Inch Forged Johnny Joint with 1-1/4 Inch RH Threaded Stud – CE-9114
Rod Ends, Heim, Johnny & NG JointsRockJock 2.5 Inch Forged Johnny Joint with 1-1/4 Inch RH Threaded Stud – CE-9114
- RockJock 4×4 R/JCE-9114 forged Johnny Joint, fully assembled
- 2.5-inch joint with 1-1/4-inch-12 right hand threaded shank
- 9/16-inch thru bolt hole and 2.625-inch wide ball center
- Externally greasable through a zerk fitting
- Suited to RockJock adjustable lower control arms or universal arm builds
SKU: R/JCE-9114 -
Rod Ends, Heim, Johnny & NG Joints
RockJock 2.5 Inch Forged Johnny Joint with 1 Inch RH Threaded Stud – CE-9113
Rod Ends, Heim, Johnny & NG JointsRockJock 2.5 Inch Forged Johnny Joint with 1 Inch RH Threaded Stud – CE-9113
- RockJock 4×4 R/JCE-9113 forged Johnny Joint with a threaded stud
- 2-inch mounting width and 7/16-inch thru bolt hole
- 2-inch mounting width and 7/16-inch thru bolt hole, greaseable through the outer shell and serviceable
- Uses internals from the CE-9112 2-inch Johnny Joint
- No vehicle named; suited to RockJock adjustable upper control arms and universal builds
SKU: R/JCE-9113 -
Rod Ends, Heim, Johnny & NG Joints
RockJock 2″ Serviceable Johnny Joint – CE-9112NC-12
- RockJock 4×4 R/JCE-9112NC-12, 2″ narrow forged Johnny Joint rod end
- Universal fit; no specific vehicle is listed
- 1″-14 right hand threads, 5″ long on the shank
- 1/2″ thru bolt hole, 2″ mounting width, greaseable
- Gold zinc plated; non-serviceable
SKU: R/JCE-9112NC-12 -
Rod Ends, Heim, Johnny & NG Joints
RockJock 2 Inch Forged Johnny Joint with 3/4 Inch RH Threaded Stud – CE-9112SP
Rod Ends, Heim, Johnny & NG JointsRockJock 2 Inch Forged Johnny Joint with 3/4 Inch RH Threaded Stud – CE-9112SP
- Universal fit 2 inch forged Johnny Joint with a right hand 3/4-16 threaded stud
- Part number R/JCE-9112SP for RockJock adjustable upper control arms and custom builds
- 2 inch mounting width and 7/16-inch thru bolt hole
- Greaseable through the outer shell, finished in gold zinc plating
SKU: R/JCE-9112SP
What these parts do
Suspension links and steering linkages must pivot as the axle moves. Rubber bushings give that pivot with some flex, but a lot of articulation twists or binds them. Flex joints, rod ends and Heim joints are mechanical pivots built to allow wide, free movement, which is why they are common on rock crawlers, custom link suspensions and trail rigs with long-travel setups.
Joint types
- Flex joints (often called Johnny joints): A sealed housing with a ball and a polymer or bronze-style liner, allowing a wide angle of movement and usually accepting a grease fitting.
- Heim joints or rod ends: A spherical bearing inside a steel body with a threaded shank, widely used for adjustable links.
- Rebuild kits: Replacement liners, seals and hardware for restoring a worn joint.
- Jam nuts: Large locking nuts that secure a threaded joint so the link keeps its adjusted length.
What to compare
- Thread size and thread direction. Many rod ends come in right-hand and left-hand versions so that a link can be adjusted by turning the tube.
- Bore diameter and bolt size.
- Housing size and the arm or tube it must thread into or be welded to.
- Material and plating for corrosion resistance.
- Whether the joint is serviceable and greasable.
Noise, maintenance and wear
Joints can be louder and more prone to dirt contamination than rubber bushings, so keep boots and seals intact and grease fittings serviced on a regular schedule. Inspect joints after trail use for play, grit and torn seals. Many people replace liners as a routine maintenance item rather than waiting for failure.
Installation notes
Special tools are often required to press joints or liners in and out, which is why large joint tools appear alongside the joints themselves. Fabrication work, including welding threaded bungs, should only be done by someone with the skills to do it correctly, because a failed link or tie rod can cause a loss of vehicle control. Tighten jam nuts firmly against the joint, and verify that threads are engaged to at least the minimum depth the manufacturer recommends. Torque fasteners to specification, and have a suspension or steering rebuild checked by a professional.
Compatibility
Confirm thread size, direction and housing dimensions against your parts, and check the manufacturer's specifications. Joints are not interchangeable between every arm or link design.
Choosing the right size and grade
Thread size is expressed by diameter and pitch, such as a fine-thread or coarse-thread bolt, and mixing them damages threads. Also check the working angle of a joint: a rod end with a larger misalignment angle suits long links on a rig with a lot of articulation. For safety-critical links, favor forged and heat-treated parts from reputable makers over unmarked castings.
Mistakes to avoid
- Using a rod end in a way that puts it in bending rather than in line with the link.
- Leaving the shank threads only partly engaged.
- Over-greasing, which can push dirt past seals when done aggressively.
- Reusing worn liners or bolts that show galling.
Inspect the joints at regular intervals and replace anything that has play, since play grows quickly under load.
Popular Flex Joints, Rod Ends & Jam Nuts brands
- RockJock 4x4 (48)
- Artec Industries (16)
- Trail Gear (12)
- Rock Krawler (10)
- TeraFlex (8)
- Skyjacker (6)
- Rubicon Express (4)
- Mountain Off Road Enterprises (4)
- Daystar (3)
- Blue Torch Fabworks (3)
- Fabtech (2)
- Pro Comp Suspension (1)
Shop Flex Joints, Rod Ends & Jam Nuts by type
Flex Joints, Rod Ends & Jam Nuts FAQ
What is the difference between a Johnny joint and a Heim joint?
A Johnny joint is a sealed flex joint with a liner, often greasable, that suits control arms. A Heim joint is a spherical rod end, usually used on adjustable links and steering. Each has different angle and noise traits.
Why do some rod ends have left-hand threads?
A left-hand and right-hand pair lets you adjust link length by turning the center tube, without removing either end. This is common on adjustable control arms and track bars. Always match thread direction to the mating part.
What does a jam nut do?
A jam nut locks a threaded joint in place against the link or tube, so vibration does not change its adjusted length. It must be tightened firmly and the threads should be fully engaged.
Can I use rod ends for steering parts?
Only if the product is rated for steering use. Tie rod and drag link ends have specific load and angle needs, and a failure is dangerous. Use parts designed for the application and have the installation checked.






