Overview
The Fabtech FTS98003 is a right-hand threaded Teflon heim joint named .75 inch in its title. It is offered as a single unit and is aimed at specialty fabrication work.
The specifications show a 3/4 inch – 16 shank and a 3/4 inch bore. Universal Fit is listed, so no particular vehicle is matched to this joint.
Key features
- Right-hand threaded Teflon heim joint
- 3/4 inch – 16 shank
- 3/4 inch bore
- Universal Fit, Fabtech part number FTS98003
Signs of a worn heim joint
A heim joint usually gives warning before it fails. Rattling at the joint, a clicking sound over bumps or visible movement when the link is pushed by hand all point to wear in the ball or liner. Check the joint with the vehicle raised and the link unloaded, then compare it with the other side of the linkage for differences.
Most heim joints are replaced rather than rebuilt, since the liner and ball are pressed into the housing as one assembly. When buying a replacement, measure the old joint’s shank and bore and confirm the thread direction. Keeping the old part on hand for comparison helps avoid ordering the wrong size.
- Listen for clicking over bumps
- Compare both sides of the linkage
- Measure the old joint before buying a replacement
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS98003 |
| UPC | 674866015296 |
| Shank | 3/4 inch – 16 |
| Bore | 3/4 inch |
| Thread direction | Right hand |
| Fitment | Universal Fit |
Vehicle fitment
Universal Fit is the only fitment given, so the joint is not matched to a make, year or model.
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Because the thread is right-hand, check that the tube or link it connects to uses right-hand threads before threading it together.
What’s included
The joint is a single unit. Check whether a jam nut is needed for your build before starting.









