Overview
The TeraFlex 1951000 is a Large FlexArm joint rebuild kit with the replacement parts needed to rebuild a TeraFlex FlexArm joint. It includes a chrome plated misalignment ball, two urethane bushings, a large retainer washer and a snap ring.
Dirt, grit, water and fluids wear the bushings over time. Rebuilding the joint with new bushings and a fresh ball restores its working condition. It is made for Jeep Wrangler JK, LJ and TJ models in the trims covered in the fitment section.
Key features
- Chrome plated misalignment ball
- Two urethane bushings
- Large retainer washer
- Snap ring included
- Suits 2 and 4-door models
Signs of FlexArm wear
A FlexArm joint works as a pivot that absorbs movement between the axle and the frame. Over time the urethane bushings lose their grip, the ball develops slop, and the joint starts to clunk or wander on rough ground. Grit and water that get past a worn seal speed this up. Rebuilding with fresh bushings and a clean ball restores the fit, but only if the housing and arm are still sound.
Before reassembly, check the housing bore for scoring, look at the ball surface for pitting, and make sure the snap ring seats fully in its groove. Lubricate the new bushings as the steps call for and keep any boot or cover in place. Recheck play after the first few drives, since new components settle in.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1951000 |
| UPC | 843885024682 |
| Type | Large FlexArm joint rebuild kit |
| Ball finish | Chrome plated |
| Bushings | 2 urethane |
| Doors | 2 and 4-door models |
Vehicle fitment
The manufacturer fitment list covers 2007-2017 Jeep Wrangler (JK) in several trims, including Rubicon, Sahara and Sport, 2005-2006 Jeep Wrangler (LJ) Unlimited and Unlimited Rubicon, and 1997-2006 Jeep Wrangler (TJ) in several trims, including Rubicon, SE and Sahara.
Wrangler JL models from 2018 on, 2018 and later JK models, and the Gladiator are not in the list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Chrome plated misalignment ball, two urethane bushings, large retainer washer and snap ring.









