Overview
The TeraFlex 4116231 is a medium urethane Monster rod end, a scaled down version of the larger Monster end. It has a 7/8 inch x 18 tpi shank and accepts a 7/16 inch bolt. It is a universal fit rod end.
The medium Monster end uses the same internals as the larger model in a smaller body. The shank size and bolt size are the dimensions to match when you choose a mount or arm.
Key features
- Spherical urethane Monster end
- Same internals as the larger Monster end, scaled down
- 7/8 inch x 18 tpi shank
- Accepts a 7/16 inch bolt
- Universal fit for mounts and arms that use a 7/8 inch x 18 tpi shank and a 7/16 inch bolt.
Urethane vs. rubber ends
Urethane rod ends are firmer than rubber bushings, so they keep the joint more precise under load and transmit more movement through the link. That firmness suits drivers who want steering and suspension response on rough ground, although it can carry more noise and vibration than a softer end. Choosing between them comes down to how the vehicle is used and how much road feel is wanted.
A spherical urethane end holds up well when the mount is square and the bolt is tight. Check the urethane for cracks, tears or chunks missing around the bolt hole, and look for play where the end meets the arm. Keep the bolt tight to the value your mount requires, and replace the end when the urethane wears through or the fit loosens. Matching the medium end to a mount drilled for the 7/16 inch bolt keeps loads spread evenly.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4116231 |
| UPC | 843885025740 |
| Type | Medium Monster rod end, spherical urethane |
| Shank | 7/8 inch x 18 tpi |
| Bolt | 7/16 inch |
| Fitment | Universal Fit |
Vehicle fitment
It is a universal fit rod end, so it is not built for a specific vehicle. Match the 7/8 inch x 18 tpi shank and 7/16 inch bolt to the arm or mount you are replacing.
No vehicle years or chassis codes are listed. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the end takes a 7/16 inch bolt, use a mount drilled for that bolt size and confirm the 7/8 inch x 18 tpi shank threads fit the rest of your link.
What’s included
One medium Monster rod end. Check the package contents against your installation before starting, and supply a bolt, nut and mount as your build requires.









