Overview
The Rock Krawler RK02219 is a Pro Krawler Joint with a 1 inch shank and right hand thread, made for off-road suspension builds that need up to +/-30 degrees of misalignment. It is a universal fit joint, so check the shank and bore against your arm or link.
The housing is chromoly, heat treated and zinc plated for strength and corrosion resistance. The inner ball is hard chrome plated billet 52100 steel. An inner raceway resists wear and isolates high frequency vibration.
Key features
- Chromoly housing, heat treated then zinc plated
- Hard chrome plated billet 52100 steel ball
- Inner raceway for wear resistance and high frequency vibration isolation
- Up to +/-30 degrees of misalignment, 60 degrees total per side
- Made to tight tolerances for consistent fit.
- Right hand thread
Choosing a joint for articulation
Articulation is the main reason to choose a joint like this over a standard bushing. A heim-style joint lets the link pivot through a wide angle, which keeps the suspension working as the axle moves over uneven ground. Plan the angle before buying by checking how far the arm will travel at full droop and full compression.
Joints in this range are often replaced in pairs with the other suspension links, since matched wear is common across a linkage. Check the housing for cracks and the ball for play at each service, and keep the joint clean so grit does not reach the raceway.
- Plan articulation at full droop and compression
- Replace joints in pairs when wear is matched
- Inspect housings for cracks at each service
Specifications
| Brand | Rock Krawler |
|---|---|
| Part number | RK02219 |
| UPC | 70000512135 |
| Shank | 1 Inch |
| Bore | 0.5625 |
| Thread direction | Right Hand |
| Housing | Chromoly, heat treated, zinc plated |
| Ball | Hard chrome plated billet 52100 steel |
| Misalignment | Up to +/-30 degrees (60 degrees total per side) |
| Fitment | Universal Fit |
Vehicle fitment
It is a universal fit joint, with no vehicle, make or chassis code tied to it. Use the 1 inch shank and 0.5625 bore to confirm it suits your link before fitting.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One Pro Krawler Joint, right hand thread. No hardware or accessories are included.









