Overview
The Rubicon Express RE3768-1 is a small Super-Flex coupler rod end with a 1-inch threaded coupler and a left-hand thread. It is used in Rubicon track bars and upper control arms.
The assembly is welded, powder coated Rubicon grey and fully assembled, so it is ready for installation. It is universal fit with a finished, serviceable DOM joint.
Key features
- Small Super-Flex housing
- 1-inch threaded coupler
- Left-hand thread direction
- Finished joint, ready for use
- Serviceable DOM joint
Thread direction and alignment
Left-hand and right-hand threads are used on opposite sides of many linkages so that turning a bar adjusts its length in the right direction. Getting the hand wrong usually shows up as a bar that will not wind in or out evenly, which can lead to forced threads. Before starting, mark the bar and check which way the adjuster turns.
Adjusting a track bar or control arm changes steering and axle alignment, so set the length in small steps and recheck the position after each change. Once the setup is right, lock the jam nut firmly against the housing. Recheck alignment after the first few drives on a new setup, as settling can shift the position slightly.
- Mark the bar before turning the adjuster
- Avoid forcing threads that resist turning
- Keep the boot clean to protect the ball
- Re-check the jam nut after initial use
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE3768-1 |
| UPC | 614901440751 |
| Housing | Small Super-Flex |
| Coupler | 1-inch threaded |
| Thread direction | Left |
| Joint details | Finished joint |
| Maintenance | Serviceable |
| Type | DOM |
| Finish | Powder coated Rubicon grey |
Vehicle fitment
It is a universal fit rod end, so no specific vehicle applies. Check the left-hand thread direction against the track bar or control arm you are fitting.
Confirm the thread direction and coupler size against your existing parts before ordering.








