Overview
The TeraFlex 4116220 is a medium angled rod end with a 9 degree angle, made to add clearance for tires or frame parts. Its 7/8 inch x 18 TPI shank accepts a 9/16 inch bolt. It is made for 2007–2015 Jeep Wrangler JK models.
The angled forging adds clearance, and the joint is finished and serviceable with a right hand thread. The shoulder width is 2-5/16 inch for the JK version and 2 inch for the TJ version, so check the shoulder width against your bracket before fitting.
Key features
- 9 degree angle for added clearance around tires or frame parts
- 7/8 inch x 18 TPI right hand shank
- Accepts a 9/16 inch bolt
- The joint is finished and serviceable.
- DOM type joint
- 2-5/16 inch shoulder width for the JK version
Shoulder width and bracket fit
Angled rod ends are used where a straight joint would hit a tire or frame component, so the angle sets the clearance and the shoulder width sets where the joint sits on the bracket. Before buying, measure the bracket and compare its width with the joint’s shoulder. A mismatch can leave the joint off-center, which loads the threads and bolt unevenly.
Pair the angled end with a bolt that matches the accepted size and seats fully in the bore. Confirm the right hand thread orientation against your link so the jam nut and threads engage correctly. Steering and suspension joints take sustained load, so inspect the shank, ball and housing at each service and replace the joint if play or cracks appear.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4116220 |
| UPC | 843885025726 |
| Angle | 9 degree |
| Shank | 7/8 inch x 18 TPI |
| Thread direction | Right |
| Bolt size accepted | 9/16 inch |
| Shoulder width | 2-5/16 inch (JK, per description) |
| Type | DOM |
| Joint | Finished joint |
| Maintenance | Serviceable |
| Fitment | Direct fit |
Vehicle fitment
The fit covers 2007–2015 Jeep Wrangler (JK) models, including the 70th Anniversary, Rubicon, Sahara, Sport, X and Unlimited trims. A TJ version with a 2 inch shoulder is not covered by this fit.
Wrangler generations other than JK, and JK model years outside 2007–2015, are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 9/16 inch bolt is the mounting bolt size, and the right hand thread means the shank must be oriented to match the link’s thread direction. Check the shoulder width against your bracket first. Steering and suspension joints take the load, so check for play and thread wear at each service.
What’s included
Not included: Check the package contents against your installation before starting.








