Overview
The TeraFlex 4116230 is a medium rod end with a spherical urethane joint, which is TeraFlex’s Monster end design. It has a 7/8 inch x 18 TPI shank, accepts a 7/16 inch bolt and has a 2 inch shoulder width. It fits 1997–2006 Jeep Wrangler TJ, 2004–2006 Wrangler LJ and 2007–2017 Wrangler JK models.
It uses the same internal design as the larger Monster end, scaled down to a medium size. It is a right hand thread part and a direct fit for the Wrangler models covered below.
Key features
- Spherical urethane joint, the Monster end design in a medium size
- Same internal design as the larger Monster end, scaled down
- 7/8 inch x 18 TPI right hand thread shank
- Accepts a 7/16 inch bolt
- 2 inch shoulder width
- It is a direct fit for the TJ, LJ and JK Wrangler models covered below.
Working with urethane joints
Urethane rod ends absorb movement that would otherwise load a steel joint directly. The spherical urethane joint flexes as the steering and suspension move, which helps with articulation and smooths out small impacts. Because the joint is a wearing part, it needs regular inspection, especially on vehicles driven hard off road or in wet, muddy conditions where grit can get into the seal area.
Pair the rod end with the rest of the steering and suspension in good condition. Worn ball joints, loose tie rod ends or a bent drag link can put extra load on the urethane and shorten its life. When replacing a rod end, check the bracket, bolt and nut for wear, and make sure the threads engage fully before tightening.
- Check for cracks, tearing or bulging around the joint
- Look for play when the steering is moved side to side
- Re-check the jam nut after the first few drives
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4116230 |
| UPC | 843885025733 |
| Joint type | Spherical urethane |
| Shank | 7/8 inch x 18 TPI |
| Thread direction | Right |
| Bolt size accepted | 7/16 inch |
| Shoulder width | 2 inch |
| Fitment | Direct fit |
Vehicle fitment
It fits 1997–2006 Wrangler TJ models in 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims; 2004–2006 LJ Unlimited and Unlimited Rubicon; and 2007–2017 JK models with several trims.
Wrangler JL models and other Jeep models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This joint takes a 7/16 inch bolt, so use a bolt of that size and check that the shank threads fully engage the bracket before tightening. Inspect the urethane joint for cracks or tearing at regular intervals, since it sees constant movement in steering and suspension use.
What’s included
Check the package contents, including bolts and nuts, against your installation before starting.









