Overview
The TeraFlex 4520011 is a large rubber bushing end, sized as a replacement for control arms that use a 1-1/4 inch x 12 tpi heim type rod end. It uses a 9/16 inch bolt and has left hand threads. It is a universal fit end.
The rubber bushing suits drivers who want quiet street driving and a vibration free feel. The end is forged and sold as a finished joint, and it is non-serviceable, so there are no internals to rebuild.
Key features
- Rubber bushing for noise and vibration dampening
- Replacement for control arms using a 1-1/4 inch x 12 tpi heim type rod end
- 9/16 inch bolt
- Left hand thread
- Forged, finished joint, non-serviceable
Rubber bushings on the trail
A rubber bushing takes up movement and absorbs vibration, which makes the arm quieter on pavement. Off road, that same give lets the joint flex through rough ground, but it also means the bushing is the part that deforms first under heavy load. Expect more compliance than a heim joint, and steer your choice toward the use you have in mind rather than the most rigid option.
Because this end is non-serviceable, regular inspection is what keeps it safe. Check for splits in the rubber, bulging at the edges, oil or dirt contamination and any play where the end meets the arm. Tighten the 9/16 inch bolt to the value your mount requires and recheck after the first few trail runs. Carry a spare end when running remote routes, since replacement is the only repair.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4520011 |
| UPC | 843885026068 |
| Thread size | 1-1/4 inch x 12 tpi, heim type |
| Thread direction | Left Hand |
| Bolt | 9/16 inch |
| Type | Forged |
| Joint details | Finished joint |
| Maintenance | Non-serviceable |
| Fitment | Universal Fit |
Vehicle fitment
It is a universal fit end, positioned as a replacement for any control arm that uses the 1-1/4 inch x 12 tpi heim type rod end. Match that thread to your arm before fitting.
No vehicle years or chassis codes are listed. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The end is non-serviceable, so there are no internals to rebuild. Plan to replace the whole end when it needs service.
What’s included
One large rubber bushing end, left hand thread. Supply a 9/16 inch bolt and any other hardware your arm needs before assembly.









