Overview
The TeraFlex 1951400 is a rebuild kit for FlexArm joints, not a complete rod end. It includes all required replacement components for rebuilding one FlexArm joint, so check which item you need before ordering.
Grit, grime, dust and fluids wear the bushings over time, and TeraFlex recommends rebuilding the joint periodically to keep it working correctly.
Key features
- Includes all required replacement components for one FlexArm joint
- Chrome plated misalignment ball
- Two urethane bushings
- Large retainer washer and snap ring
Rebuilding a FlexArm joint
A FlexArm joint lets a link move through its arc while keeping the suspension controlled. Over time grit, dust and fluids get into the bushings and wear them, which leads to looseness and noise. Rebuilding the joint restores its movement and avoids replacing the whole assembly, provided the housing remains sound.
Good preparation makes a rebuild much easier. Clean the housing, remove the old snap ring carefully, and inspect the bore for scoring before fitting new bushings. Lubricate the new bushings as the assembly calls for, then reinstall the washer and snap ring so they seat fully in their groove. Work the joint by hand afterward to confirm smooth travel.
- Inspect the housing bore for scoring or cracks
- Replace bushings, ball, washer and snap ring together
- Check the joint moves freely before reinstalling
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1951400 |
| UPC | 843885024750 |
| Ball finish | Chrome plated |
| Bushings | Two urethane |
| Retainer and ring | Large retainer washer, snap ring |
Vehicle fitment
No vehicle, year or model applies to this kit. It is universal fit, but a FlexArm rebuild kit is tied to the joint it services, so confirm the joint matches before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rebuilding a FlexArm joint means replacing the bushings, misalignment ball, washer and snap ring together, then checking that the joint moves freely before reinstalling it.
What’s included
The kit includes one chrome plated misalignment ball, two urethane bushings, a large retainer washer and a snap ring. Keep the existing joint housing in use, since only the rebuild components come in the kit.









