Overview
The G2 Axle and Gear 66-2011CN is a nodular iron 3rd member case for the Ford 9 inch rear axle. It has a 3.250 inch carrier bearing bore for aftermarket differentials and is cast as a heavy duty nodular iron part with support ribbing.
It is a Ford 9 inch housing type, and no vehicle models are attached. Nodular iron is chosen for maximum strength and suits high horsepower engines and large tires.
Key features
- Heavy duty nodular iron casting
- Heavy duty support ribbing
- Billet steel spanner nuts
- Improved pilot bearing support
- 3.250 inch carrier bearing bore for aftermarket differentials
Setting up a 3rd member
A 3rd member carries the ring gear and differential, so the case work affects the whole rear axle. Before buying, confirm the carrier you plan to use, the bearing preload you will set, and the pinion depth. A mismatch at any point can damage gears quickly.
Support ribbing and billet spanner nuts help the case hold its shape under load, but they do not replace careful setup. Check the bearing bores and caps for wear before installing a new case, and clean all sealing faces before bolting the cover.
Heavier tires and high torque place extra stress on the case and axle shafts. If you run larger tires, plan to check ring gear mesh and bolt torque after the first few drives and at each oil change.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 66-2011CN |
| UPC | 631410096545 |
| Material | Nodular iron |
| Carrier bearing bore | 3.250 inch |
| Axle location | Rear |
| Housing type | Ford 9 inch |
| Spanner nuts | Billet steel |
| Fitment | Universal fit |
Vehicle fitment
Fit is by housing type. It is made for the rear Ford 9 inch axle and is universal fit, so match it to your housing before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The carrier bearing bore is labeled for aftermarket differentials, so confirm the carrier you plan to use matches the 3.250 inch bore. Gear setup and bearing preload are best left to a qualified axle shop.
What’s included
Billet steel spanner nuts are a feature of the case. A carrier and bearings are not part of it.
Not included: Carrier, ring and pinion and bearings need separate parts.









