Rear Bumpers
Showing 97–108 of 340 resultsSorted by popularity
-
-
Rear Bumpers
Trail Gear Rock Defense Rear Bumper (Bare) – 300411-1-KIT
- Trail Gear Rock Defense rear bumper, part number 300411-1-KIT, bare finish
- Built from 1.75 inch OD x .120 inch wall DOM tubing
- Receiver hitch included; no tire carrier
- Named for Tacoma; confirm model years before ordering
SKU: TGI300411-1-KIT -
Rear Bumpers
Smittybilt Tubular Rear Bumper without Hitch in Stainless Steel (Stainless Steel) – RB01-S
Rear BumpersSmittybilt Tubular Rear Bumper without Hitch in Stainless Steel (Stainless Steel) – RB01-S
- Stainless steel tubular rear bumper for the 1997–2006 Wrangler TJ and 1987–1995 Wrangler YJ
- 1-piece, robotically welded design with pre-cut vertical uprights
- No receiver hitch; D-ring mounts not included
- Lifetime warranty on polished stainless
SKU: S/BRB01-S -
Rear Bumpers
Smittybilt XRC Atlas Rear Bumper and Tire Carrier (Black) – 76896
- Rear bumper with integrated tire carrier for 2-door and 4-door models
- Holds tires up to 37 inches; Class III tow rated hitch
- Mounting points for a gas can and jack, plus a 3rd brake light bracket
- Two-stage textured matte black finish on 3/16 cold rolled steel
SKU: S/B76896 -
Rear Bumpers
Smittybilt XRC Gen2 Rear Bumper (Black) – 76858
- Rear bumper for the 2007–2018 Jeep Wrangler JK, 2-door and 4-door
- 3/16-inch cold rolled steel with textured matte black powder coat
- Class III receiver hitch, D-ring mounts and LED lights included
- Tire carrier can be added later (not included)
SKU: S/B76858 -
-
Rear Bumpers
Smittybilt XRC Rear Tire Carrier Bumper (Black) – 76653
- Fits 2004–2006 Wrangler (LJ) Unlimited, 1997–2006 Wrangler (TJ) and 1987–1995 Wrangler (YJ)
- Black powder coat rear tire carrier bumper
- Built-in Class III receiver hitch and two D-ring mounts
- 3/16-inch cold rolled steel construction
- Bumper only; tire carrier sold separately as part 76654
SKU: S/B76653 -
Rear Bumpers
Smittybilt SRC Gen2 Rear Bumper (Black) – 76614
- Fits 2007–2018 Jeep Wrangler (JK) two-door and four-door models
- Class III receiver hitch built into the bumper
- Solid plate center sections protect frame horns and crossmembers
- Two D-ring mounts, plus a 3/4-inch shackle recommendation
- Backup light cut-out with lights included
SKU: S/B76614 -
-
What a rear bumper adds
A stock rear bumper is mostly cosmetic and impact cover. An aftermarket bumper adds a stronger structure and usually useful hardware: recovery shackle tabs, a receiver for towing, a mount for lights or a spare tire carrier, and better clearance at the back corners. Trimmed corners improve the departure angle on steep exits, which matters on trail rigs and lifted trucks.
Materials and construction
- Plate steel: strong and common on Jeep bumpers. It is heavy, so allow for added weight on the rear suspension.
- Tubular or pipe-and-tread-plate designs: a classic truck look, with a step surface in some styles.
- Aluminum: much lighter, with lower corrosion risk. It is not as strong as steel at the same thickness, so check the wall thickness in the product listing.
Finishes include black powder coat and bare steel. Bare steel needs a coat of paint before use, and any finish will chip on the trail and benefit from touch-ups.
Features to compare
- Hitch receiver: check the size and the towing rating of the receiver and whether the bumper is rated for towing at all.
- Shackle mounts: look for thick tabs sized for the shackles you plan to use. Never use a tow hook or tab as a lifting point.
- Sensor cutouts: newer trucks with parking sensors may need a bumper made to accept them, as some listings state.
- Tire carrier: some Jeep bumpers-bumpers-tire-carriers-winch-mounts-2 include or accept a swing-out carrier. A mounted tire adds a lot of load, so check the rated capacity.
- License plate and lighting: many bumpers-bumpers-tire-carriers-winch-mounts-2 include plate and light provisions. Lighting and plate rules vary by state, so check local regulations.
Fitment
Rear bumpers-bumpers-tire-carriers-winch-mounts-2 are model specific. The listing may specify a vehicle generation, such as a range of Wrangler years or a particular Ford truck generation, and may be limited by whether the bumper has a tire carrier mount. Confirm fitment for your exact year, make and model, and check the manufacturer's specifications for weight and hardware.
Installation notes
Expect to remove the factory bumper and sometimes the hitch, wiring and sensors. Rear bumpers-bumpers-tire-carriers-winch-mounts-2 can weigh well over 50 pounds, so use a jack or a helper to hold the part. Tighten bolts to the specified torque, and have a shop install it if you are not comfortable working under the vehicle. Recheck the bolts after the first drive and after rough trail use.
Choosing for your use and avoiding mistakes
A daily-driven truck, a weekend trail Jeep and a heavy overland rig each ask different things of a rear bumper. If the vehicle tows regularly, weigh the receiver rating and tongue clearance first. If it climbs rocks, the shape of the corners and the height of the lower edge matter more than looks.
- Account for the weight. A bumper plus a tire carrier, jerry can mounts and lights can add a large load behind the axle. Consider heavier rear springs or shocks if the rear sits low afterward.
- Check clearance for the spare and the tailgate. A swing-out carrier needs room to open, and some tailgates will not clear a hitch receiver when open.
- Plan the wiring. If your vehicle has a tow connector, backup sensors or a third brake light, verify how those will be routed or relocated.
- Inspect the welds and the hardware. After trail use, look for cracked welds, stretched bolt holes and loose fasteners, and keep the exposed steel coated.
Popular Rear Bumpers brands
- Fab Fours (79)
- Smittybilt (51)
- Addictive Desert Designs (28)
- Poison Spyder Customs (26)
- Ranch Hand (21)
- Nfab (17)
- Rampage (15)
- ARB 4x4 Accessories (14)
- Body Armor 4x4 (12)
- Warn (11)
- Westin (11)
- Bestop (9)
Rear Bumpers FAQ
Do aftermarket rear bumpers include a hitch?
Many include a receiver or accept a hitch, but not all do. Check the listing for receiver size and the towing rating. Some designs are intended only for trail protection and recovery points.
Will a heavy rear bumper affect my suspension?
Steel bumpers add weight behind the axle, which can cause the rear to sit lower, especially with a tire carrier. Springs or shocks with higher ratings may be needed, so check the weight in the listing.
Are steel or aluminum bumpers better?
Neither is better in every case. Steel is stronger for the money and heavier, while aluminum is much lighter and resists rust but can cost more. Choose based on weight tolerance and intended use.
Can I use the shackle mounts for recovery?
Shackle tabs are made for recovery, but follow the rated capacity of the shackle and the bumper and use soft, correctly rated gear. Never exceed ratings or use them as a lifting point.










