Overview
The Fab Fours Vengeance Series Rear Bumper, part number FF09-E1751-1, is a black sensor-compatible rear replacement bumper for the 2009–2014 Ford F-150. It is made from 11 gauge U.S. steel and weighs 60 lb.
Two front-side openings accept (4) 2×2 Dually lights or (2) 6-inch light bars, with the lights not included. The bumper retains the factory receiver hitch and wiring location and is finished in Fab Fours’ 2 stage black powder coat.
Key features
- 11 gauge U.S. steel construction
- Sensor compatible
- Openings for (4) 2×2 Dually lights or (2) 6-inch light bars
- Fab Fours 2 stage black powder coat
- Retains the OEM receiver hitch and wiring location
- 100% made in the USA
Replacing a rear bumper
A rear bumper does more work than its looks suggest. It carries the hitch load when towing, takes the impact of reversing into obstacles and often supports lights, recovery points and sensors. A replacement that keeps the factory hitch and wiring locations means the towing equipment and harness can be reused without rerouting, which saves time during installation.
Before fitting a new bumper, inspect the old one and the mounting points under it. Look for cracked welds, bent brackets and rust around the frame attachments. Replacing a worn bumper is also a good time to check the hitch receiver bolts, the trailer wiring connector and any sensor leads that run through the bumper cavity.
If you plan to add lights to the side openings, choose the lights before you cut or drill anything, and make sure the wiring path is clear. Light wiring is easier to route while the bumper is off the truck. Keep a fused feed for auxiliary lights and tie it into switched power rather than running it straight from the battery.
- Hitch bolts and receiver tightness
- Sensor wiring and connectors
- Light wiring routed before final mounting
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FF09-E1751-1 |
| UPC | 5810110758 |
| Product type | Rear replacement sensor bumper |
| Series | Vengeance |
| Steel | 11 gauge U.S. steel |
| Finish | 2 stage black powder coat |
| Weight | 60 lb |
| Light openings | (4) 2×2 Dually lights or (2) 6 in light bars |
| Position | Rear |
| Fit type | Direct fit |
| D-ring mounts | Not included |
| Tire carrier | None |
| Origin | Made in the USA |
Vehicle fitment
Fab Fours lists part FF09-E1751-1 for the 2009–2014 Ford F-150, including the SVT Raptor.
Ford F-150 trucks from 2015 onward and the F-250 and F-350 Super Duty are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lights for the two openings are added separately. The bumper is sensor compatible and keeps the factory hitch location.
What’s included
One Vengeance rear sensor bumper.
Not included: Lights for the two front-side openings, sold separately.














