Overview
The Fab Fours Sensor Bumper Rear, part number FF15-W3251-1, is a black powder-coated rear replacement bumper for the 2015–2018 Ford F-150. It integrates the existing receiver hitch and adds lower steps and recovery points.
Construction is durable formed steel with 1/4-inch keyed and gusseted mounts and 3/4-inch D-ring mounts. The finish is a 2 stage black powder coat, and integrated steps sit on either side of the tailgate.
Key features
- Integrated steps on either side of the tailgate
- Durable formed steel construction
- 3/4-inch D-ring mounts
- 1/4-inch keyed and gusseted mounts
- 2 stage black powder coat
- Retains the OEM receiver hitch and wiring locations
Sensor bumper ownership basics
Sensor bumpers are built so parking sensors sit in a consistent position, which helps the system read objects accurately. After installation, check that each sensor sits flush and that no paint, mud or film covers the sensing face. A dirty or misaligned sensor can give false readings, so clean the bumper area regularly, especially in winter.
Integrated tailgate steps make the rear easier to reach but add load points. Step up with care, and check the step fasteners and welds whenever you inspect the bumper. Loose steps can shift under weight and stress the surrounding panel, so tighten fasteners as soon as movement shows up.
Rear recovery points are useful for tow and recovery work only when the mounts are sound. Keep the D-ring mounts clean and free of rust, and use recovery gear rated for the load. Rear bumpers also collect road spray, so rinsing the underside after wet driving slows corrosion around the lower mounts.
- Clean sensor faces before parking
- Check tailgate step fasteners regularly
- Inspect D-ring mounts after recovery use
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FF15-W3251-1 |
| UPC | 5810110376 |
| Product type | Rear replacement sensor bumper |
| Finish | 2 stage black powder coat |
| Steel construction | 3/16 in formed steel |
| D-ring mounts | 3/4 in |
| Mounts | 1/4 in keyed and gusseted |
| Position | Rear |
| Fit type | Direct fit |
| Tire carrier | None |
Vehicle fitment
Fab Fours lists part FF15-W3251-1 for the 2015–2018 Ford F-150, including the Police Responder and SSV versions.
The 2009–2014 F-150 and the 2019 and later models are not covered, and the Raptor is not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bumper keeps the factory hitch and wiring locations. Check the package contents against your installation before starting.
What’s included
One rear replacement sensor bumper.












