Overview
The Fab Fours Rear Bumper with Sensor, part number CH14-W3051-1, is a black powder-coated premium rear bumper for 2015–2018 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD trucks. Its sensor holes are laser cut to work with factory-equipped parking sensors.
The holes follow the same pattern as the factory bumper and suit the OEM sensor housing. The recessed D-ring mounts do not interfere with the factory system, and they are included.
Key features
- Laser-cut sensor holes in the factory pattern
- Compatible with the OEM sensor housing
- Recessed D-ring mounts, included
- Mounts that Fab Fours says do not interfere with the factory system
- Part of the Fab Fours premium bumper line
- Black powder coat finish
Transferring rear parking sensors
Moving factory parking sensors into a new bumper is mostly a matter of careful removal and clean seating. Pull the sensor housings straight out of the old bumper, keep the wiring harness connected, and inspect each housing for cracks before it goes into the laser-cut holes. A sensor seated at an angle may read incorrectly.
After installation, test the rear sensors at low speed in an open area to confirm the alerts respond to a flat surface. Check the chime volume and the display, since a sensor that reads too close or too far can point to a seating or wiring problem. Recheck the connectors after the first few drives.
- Inspect sensor housings before reinstalling
- Seat each housing square in its hole
- Test the rear alerts at low speed
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | CH14-W3051-1 |
| UPC | 5810109356 |
| Product type | Rear sensor bumper |
| Line | Premium |
| Finish | Black powder coat |
| Sensor holes | Laser cut, factory pattern |
| D-ring mounts | Included, recessed |
| Position | Rear |
| Fit type | Direct fit |
| Tire carrier | None |
Vehicle fitment
Fab Fours lists part CH14-W3051-1 for the 2015–2018 Chevrolet Silverado 2500 HD and 3500 HD and the 2015–2018 GMC Sierra 2500 HD and 3500 HD.
It is for the 2015–2018 Chevrolet Silverado 2500 HD and 3500 HD and GMC Sierra 2500 HD and 3500 HD models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The laser-cut holes accept the factory sensor housings, so the sensors from the original bumper are the parts to transfer.
What’s included
One rear sensor bumper with recessed D-ring mounts.












