Overview
The Fab Fours Full Size Rear Bumper, part number DR03-W1050-1, is a matte black rear bumper for the 2003–2009 Dodge Ram 2500 and 3500. The existing receiver hitch is integrated into the bumper, which has D-ring recovery points built in.
The design is built for strength and durability. The 3/16-inch formed steel body has integrated steps on either side of the tailgate and 1/4-inch keyed and gusseted mounts.
Key features
- Integrated steps on either side of the tailgate
- 3/16-inch formed steel construction
- 3/4-inch D-ring recovery points, D-ring mounts included
- 1/4-inch keyed and gusseted mounts
- 2 stage matte black powder coat; the -B suffix denotes bare steel
- Retains the OEM receiver hitch and wiring locations
Rear bumper and hitch use
A rear bumper sits low and close to the ground, so it affects the departure angle on steep exits as well as the approach to the tailgate. The factory hitch and wiring are kept in place, which allows the usual trailer and accessory connections to continue working. Consider how the bumper, hitch and any cargo setup will share the load at the back of the truck.
Recovery points and hitch-mounted accessories add weight and leverage to the rear of the truck. Check mounting bolts and welds after heavy towing or recovery use, since loose hardware can wear the mounts. Keep wiring for backup lights and sensors routed away from the bumper edges where they can be pinched.
- Check hitch pin and bolt torque after towing
- Inspect steps and tailgate clearance regularly
- Route rear wiring away from sharp edges
- Coat exposed steel welds to slow rust
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | DR03-W1050-1 |
| UPC | 5810101275 |
| Product type | Full size rear bumper |
| Finish | 2 stage matte black powder coat |
| Steel construction | 3/16 in formed steel |
| Recovery points | 3/4 in D-rings, included |
| Mounts | 1/4 in keyed and gusseted |
| Position | Rear |
| Fit type | Direct fit |
| Tire carrier | None |
| Origin | Made in the USA |
Vehicle fitment
Fab Fours lists part DR03-W1050-1 for the 2003–2009 Dodge Ram 2500 and the 2003–2009 Dodge Ram 3500.
The 1994–2002 Ram trucks, Ram 1500 and the 2010 and later models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The factory hitch and wiring stay in their original locations. D-ring mounts arrive with the bumper, so only shackles are needed for recovery use.
What’s included
One full size rear bumper for the Ram 2500 and 3500, with D-ring mounts and steps.
Not included: Shackles.
















