Rear Bumpers
Showing 61–72 of 340 resultsSorted by popularity
-
-
-
Bumpers
Addictive Desert Designs Stealth Fighter Rear Bumper with Sensors (Black) – R681241280103
- Fits the 2016–2023 Toyota Tacoma
- Low profile steel plate rear bumper with powder coat finish
- Two rear-facing cube light mounts, standard
- Integrated reinforced clevis mounts for 3/4-inch D-rings
- Sensor cutouts keep the factory system in use
SKU: ADSR681241280103 -
Bumpers
Addictive Desert Designs Stealth Fighter Rear Bumper with Sensor Cutouts – R221231280103
- Fits the 2019 Ford Ranger
- Modern plate steel rear bumper that adds no extra bulk
- Mounts for two cube lights for off-road lighting
- Reinforced clevis mounts for 3/4-inch D-rings
- Sensor cutouts keep the factory system working
SKU: ADSR221231280103 -
Bumpers
Addictive Desert Designs Stealth Fighter Rear Bumper with Backup Sensor Cutouts (Black) – R441241280103
BumpersAddictive Desert Designs Stealth Fighter Rear Bumper with Backup Sensor Cutouts (Black) – R441241280103
- Fits 2019–2020 Chevrolet Silverado 1500 and GMC Sierra 1500
- Plate steel rear bumper that keeps the factory tow hitch and trailer plug
- Two rear-facing cube light mounts
- Reinforced D-ring mounts for recovery
- Backup sensor cutouts and fully bolt-on installation
SKU: ADSR441241280103 -
Bumpers
Addictive Desert Designs Stealth Fighter Rear Bumper (Black) – R971121280103
- Fits the 2020–2026 Jeep Gladiator
- Low profile plate steel that keeps the Gladiator’s bed lines
- Two rear-facing cube light mounts come standard
- Integrated reinforced clevis mounts for 3/4-inch D-rings
- Black finish with no receiver hitch or tire carrier
SKU: ADSR971121280103 -
Bumpers
Addictive Desert Designs Stealth Fighter Rear Bumper (Black) – R741121280103
- Fits the 2014–2018 Toyota Tundra
- Slim plate steel rear bumper that adds no extra size or bulk
- Two rear-facing cube light mounts, standard
- Integrated reinforced clevis mounts for 3/4-inch D-rings
- Optional backup sensor cuts keep factory features
SKU: ADSR741121280103 -
Bumpers
Addictive Desert Designs Stealth Fighter Rear Bumper (Black) – R681121280103
- Fits 2016–2019 Toyota Tacoma
- Slim plate steel rear bumper without added bulk
- Two rear-facing cube light mounts, standard
- Reinforced clevis mounts for 3/4-inch D-rings
- Black finish with two cube light mounts
SKU: ADSR681121280103 -
Bumpers
Addictive Desert Designs Stealth Fighter Rear Bumper (Black) – R620081280103
- Fits 2021–2026 Ram 1500 TRX
- Modern plate steel design with clean lines and angles
- Two rear-facing cube light mounts behind the panels
- Parking sensor cutouts and trailer plug accommodations
- Reinforced clevis mounts for 3/4-inch D-rings
SKU: ADSR620081280103 -
Bumpers
Addictive Desert Designs Stealth Fighter Rear Bumper – R971241280103
- Fits 2020–2026 Jeep Gladiator
- Low profile plate steel rear bumper with powder coat finish
- Two rear-facing cube light mounts come standard
- Parking sensors retained with sensor-compatible design
- Reinforced clevis mounts for 3/4-inch D-rings
SKU: ADSR971241280103 -
Bumpers
Addictive Desert Designs Stealth Fighter HD Rear Bumper with Back-Up Sensors (Black) – R961321280103
BumpersAddictive Desert Designs Stealth Fighter HD Rear Bumper with Back-Up Sensors (Black) – R961321280103
- Fits 2018–2026 Jeep Wrangler JL
- Low profile plate steel rear bumper with powder coat finish
- Keeps the factory backup sensors, trailer hitch and trailer plug bracket
- Two rear-facing cube light mounts
- Works with the factory spare tire carrier or the aftermarket tire gate
SKU: ADSR961321280103 -
Bumpers
Addictive Desert Designs Rock Fighter Rear Bumper with Sensor Cutouts – R23012NA01NA
- Fits the 2021–2026 Ford Bronco
- Relocation bracket allows a 37-inch spare tire to mount
- Keeps the OEM tire mount, backup camera, hitch and license plate light
- Two reinforced clevis mounts for 3/4-inch D-rings
- Sensor cutouts for factory backup sensors
SKU: ADSR23012NA01NA
What a rear bumper adds
A stock rear bumper is mostly cosmetic and impact cover. An aftermarket bumper adds a stronger structure and usually useful hardware: recovery shackle tabs, a receiver for towing, a mount for lights or a spare tire carrier, and better clearance at the back corners. Trimmed corners improve the departure angle on steep exits, which matters on trail rigs and lifted trucks.
Materials and construction
- Plate steel: strong and common on Jeep bumpers. It is heavy, so allow for added weight on the rear suspension.
- Tubular or pipe-and-tread-plate designs: a classic truck look, with a step surface in some styles.
- Aluminum: much lighter, with lower corrosion risk. It is not as strong as steel at the same thickness, so check the wall thickness in the product listing.
Finishes include black powder coat and bare steel. Bare steel needs a coat of paint before use, and any finish will chip on the trail and benefit from touch-ups.
Features to compare
- Hitch receiver: check the size and the towing rating of the receiver and whether the bumper is rated for towing at all.
- Shackle mounts: look for thick tabs sized for the shackles you plan to use. Never use a tow hook or tab as a lifting point.
- Sensor cutouts: newer trucks with parking sensors may need a bumper made to accept them, as some listings state.
- Tire carrier: some Jeep bumpers-bumpers-tire-carriers-winch-mounts-2 include or accept a swing-out carrier. A mounted tire adds a lot of load, so check the rated capacity.
- License plate and lighting: many bumpers-bumpers-tire-carriers-winch-mounts-2 include plate and light provisions. Lighting and plate rules vary by state, so check local regulations.
Fitment
Rear bumpers-bumpers-tire-carriers-winch-mounts-2 are model specific. The listing may specify a vehicle generation, such as a range of Wrangler years or a particular Ford truck generation, and may be limited by whether the bumper has a tire carrier mount. Confirm fitment for your exact year, make and model, and check the manufacturer's specifications for weight and hardware.
Installation notes
Expect to remove the factory bumper and sometimes the hitch, wiring and sensors. Rear bumpers-bumpers-tire-carriers-winch-mounts-2 can weigh well over 50 pounds, so use a jack or a helper to hold the part. Tighten bolts to the specified torque, and have a shop install it if you are not comfortable working under the vehicle. Recheck the bolts after the first drive and after rough trail use.
Choosing for your use and avoiding mistakes
A daily-driven truck, a weekend trail Jeep and a heavy overland rig each ask different things of a rear bumper. If the vehicle tows regularly, weigh the receiver rating and tongue clearance first. If it climbs rocks, the shape of the corners and the height of the lower edge matter more than looks.
- Account for the weight. A bumper plus a tire carrier, jerry can mounts and lights can add a large load behind the axle. Consider heavier rear springs or shocks if the rear sits low afterward.
- Check clearance for the spare and the tailgate. A swing-out carrier needs room to open, and some tailgates will not clear a hitch receiver when open.
- Plan the wiring. If your vehicle has a tow connector, backup sensors or a third brake light, verify how those will be routed or relocated.
- Inspect the welds and the hardware. After trail use, look for cracked welds, stretched bolt holes and loose fasteners, and keep the exposed steel coated.
Popular Rear Bumpers brands
- Fab Fours (79)
- Smittybilt (51)
- Addictive Desert Designs (28)
- Poison Spyder Customs (26)
- Ranch Hand (21)
- Nfab (17)
- Rampage (15)
- ARB 4x4 Accessories (14)
- Body Armor 4x4 (12)
- Warn (11)
- Westin (11)
- Bestop (9)
Rear Bumpers FAQ
Do aftermarket rear bumpers include a hitch?
Many include a receiver or accept a hitch, but not all do. Check the listing for receiver size and the towing rating. Some designs are intended only for trail protection and recovery points.
Will a heavy rear bumper affect my suspension?
Steel bumpers add weight behind the axle, which can cause the rear to sit lower, especially with a tire carrier. Springs or shocks with higher ratings may be needed, so check the weight in the listing.
Are steel or aluminum bumpers better?
Neither is better in every case. Steel is stronger for the money and heavier, while aluminum is much lighter and resists rust but can cost more. Choose based on weight tolerance and intended use.
Can I use the shackle mounts for recovery?
Shackle tabs are made for recovery, but follow the rated capacity of the shackle and the bumper and use soft, correctly rated gear. Never exceed ratings or use them as a lifting point.









