Overview
The Fab Fours CH14-W3050-1 is a heavy duty rear bumper in black powder coat for the 2015–2018 Chevrolet Silverado 2500 HD and 3500 HD and the 2015–2018 GMC Sierra 2500 HD and 3500 HD.
The bumper is built from formed steel for strength and durability. It keeps the factory receiver hitch and wiring locations, and adds D-ring recovery points and integrated steps on either side of the tailgate.
Key features
- Two-stage black powder coat finish
- Heavy duty rear bumper built from 3/16″ formed steel
- Integrated steps on either side of the tailgate
- Retains the OEM receiver hitch and wiring locations
- 3/4″ D-ring recovery points, with the D-ring mounts included
- 1/4″ keyed and gusseted mounts
- Also offered in two-stage matte black powder coat or bare steel (part number ends in -B instead of -1)
- Made in the USA
Recovery points and tow loads
Rear D-ring recovery points are for pulling a stuck truck out, not for towing a trailer. Use rated shackles and straps, keep the pull as straight as possible, and avoid jerking loads that strain the mounts. After any recovery, look at the D-ring mounts, the bumper welds and the gusseted brackets for bending or cracks.
Integrated steps on either side of the tailgate are useful for reaching the bed, but they carry body weight and should be checked for loose bolts like the bumper itself. Clean the powder coat regularly, and touch up bare steel promptly so rust does not spread under the finish.
- Use rated recovery shackles
- Check D-ring mounts after each recovery
- Inspect tailgate steps for loose fasteners
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | CH14-W3050-1 |
| UPC | 5810107826 |
| Product type | Heavy duty rear bumper |
| Position | Rear |
| Finish | Two-stage black powder coat |
| Construction | 3/16″ formed steel |
| Recovery points | 3/4″ D-ring |
| Mounts | 1/4″ keyed and gusseted |
| D-ring mounts included | Yes |
| Receiver hitch included | No (retains the OEM receiver hitch location) |
| Tire carrier | No |
| Fit type | Direct fit |
| Origin | Made in the USA |
Vehicle fitment
The manufacturer fitment list for the Fab Fours CH14-W3050-1 covers the 2015–2018 Chevrolet Silverado 2500 HD and 3500 HD (High Country, LT, LTZ, WT) and the 2015–2018 GMC Sierra 2500 HD and 3500 HD (Base, Denali, SLE, SLT).
this product does not cover other model years or the light-duty Silverado 1500 and Sierra 1500 unless they are listed above. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Torque all fasteners to the specified values before driving. Support the vehicle on jack stands rather than a jack alone while working underneath it, and re-check the fasteners after the first miles of driving. Heavy bumpers are awkward to lift, so plan for a second person or a lifting aid. Route trailer wiring and any sensors clear of the new bumper.
What’s included
- Rear bumper in two-stage black powder coat.
- D-ring recovery mounts
Not included: receiver hitch and tire carrier.














