Overview
The Fab Fours Full Size Rear Bumper, part number FF09-W1750-1, is a matte black rear bumper for the 2009–2014 Ford F-150. The existing receiver hitch is integrated, and D-ring recovery points and tailgate steps are built in.
Fab Fours frames the design around strength and durability. The bumper is 3/16-inch formed steel and carries 1/4-inch keyed and gusseted mounts.
Key features
- Integrated steps on either side of the tailgate
- 3/16-inch formed steel construction
- 3/4-inch D-ring recovery points, D-ring mounts included
- 1/4-inch keyed and gusseted mounts
- 2 stage matte black powder coat; the -B suffix denotes bare steel
- Retains the OEM receiver hitch and wiring locations
Mounting and recovery use
A full size rear bumper carries more than cosmetic weight. It is the main structure around the receiver hitch, so towing loads pass through it and into the frame. Keeping the factory hitch and wiring locations means the trailer harness and hitch hardware can be reused without rerouting or extra fabrication.
Recovery points on a rear bumper are useful only when the mounts and attachment hardware are sound. Before using them, check the keyed and gusseted mounts for cracks, make sure the bolts are snug, and confirm the D-rings are seated square. Use rated shackles and a strap or line suited to the load, and avoid side pulls that could twist the bumper on its mounts.
Tailgate steps add a point of contact and a stress path, so check the step welds and fasteners along with the rest of the bumper. Mud, road salt and gravel collect in the lower channels and speed corrosion, so rinse the underside after wet or winter driving and touch up chips in the powder coat before rust starts.
- Check mount welds and bolts after heavy use
- Use rated shackles and strap for recovery
- Touch up powder coat chips promptly
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FF09-W1750-1 |
| UPC | 5810101350 |
| Product type | Full size rear bumper |
| Finish | 2 stage matte black powder coat |
| Steel construction | 3/16 in formed steel |
| Recovery points | 3/4 in D-rings, included |
| Mounts | 1/4 in keyed and gusseted |
| Position | Rear |
| Fit type | Direct fit |
| Tire carrier | None |
| Origin | Made in the USA |
Vehicle fitment
Fab Fours lists part FF09-W1750-1 for the 2009–2014 Ford F-150 in the FX2, FX4, Harley-Davidson, King Ranch, Lariat, Limited, Platinum, STX, XL and XLT versions.
The SVT Raptor is not on this list, and F-150 trucks from 2015 onward are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The retained factory hitch and wiring locations mean towing equipment mounts where it did before.
What’s included
One full size rear bumper for the 2009–2014 F-150, supplied with D-ring mounts and tailgate steps.












