Overview
The Fab Fours Vengeance Series Rear Bumper in bare steel, part number FS08-E1351-B, is a sensor-compatible replacement bumper for the 2008–2010 Ford F-250 Super Duty and F-350 Super Duty. It is built from 11 gauge U.S. steel and weighs 65 lb.
Two front-side openings accept (4) 2×2 Dually lights or (2) 6-inch light bars, with the lights not included. The bumper retains the OEM receiver hitch and wiring location.
Key features
- 11 gauge U.S. steel construction
- Sensor compatible
- Openings for (4) 2×2 Dually lights or (2) 6-inch light bars
- Bare steel finish
- Retains the OEM receiver hitch and wiring location
- 100% made in the USA
Finishing bare steel
Bare steel gives you a blank surface for paint or coating, but it has no protection until it is treated. Clean the bumper, remove mill scale and oil, then apply a primer and topcoat suited to outdoor steel. Pay attention to cut edges, weld seams and any drilled holes, since these rust first when exposed to moisture and road salt.
Plan the light openings and their wiring before painting so the finished surface is not damaged during installation. Dually lights and light bars should be mounted and aimed after the bumper is on the truck. Check the rear sensor wiring for chafing once the bumper is fitted, and keep the receiver hitch free of paint build-up.
- Prime cut edges and weld seams
- Mount lights after the coating cures
- Check sensor wiring for chafing
- Keep hitch receiver free of paint
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FS08-E1351-B |
| UPC | 5810110925 |
| Product type | Rear replacement sensor bumper |
| Series | Vengeance |
| Steel | 11 gauge U.S. steel |
| Finish | Bare steel |
| Weight | 65 lb |
| Light openings | (4) 2×2 Dually lights or (2) 6 in light bars |
| Fit type | Direct fit |
| D-ring mounts | Not included |
| Tire carrier | None |
| Origin | Made in the USA |
Vehicle fitment
Fab Fours lists part FS08-E1351-B for the 2008–2010 Ford F-250 Super Duty and the 2008–2010 Ford F-350 Super Duty.
This bumper is a rear unit, so check its position against your truck before installing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lights for the openings are added separately. As the steel is bare, painting or coating is up to the owner.
What’s included
One Vengeance sensor bumper in bare steel.
Not included: Lights and any paint or coating.









