Overview
The Fab Fours Full Size Rear Bumper, part number FS08-W1350-1, is a matte black rear bumper for the 1999–2015 Ford F-250 Super Duty and F-350 Super Duty. It integrates the existing receiver hitch and adds D-ring recovery points.
The stated focus of the design is strength and durability. The bumper is 3/16-inch formed steel with integrated steps on either side of the tailgate and 1/4-inch keyed and gusseted mounts.
Key features
- Integrated steps on either side of the tailgate
- 3/16-inch formed steel construction
- 3/4-inch D-ring recovery points, D-ring mounts included
- 1/4-inch keyed and gusseted mounts
- 2 stage matte black powder coat; the -B suffix denotes bare steel
- Retains the OEM receiver hitch and wiring locations
Before you buy
A full size rear bumper takes on the job of the stock bumper while still carrying the receiver hitch and recovery gear. Before ordering, compare the bumper’s mounting points with the hitch and tailgate on your truck, since a rear bumper sits close to both. Check how the tailgate clears the bumper at full open and at full close, and make sure the tail lamps and license plate bracket still have room once the bumper is in place.
Recovery points on a rear bumper are only as good as the frame they bolt to. Confirm the mounts are tight after installation and look again after the first few trail runs. Choose recovery shackles and straps rated for your load, because the D-ring mounts are only one part of the recovery setup.
- Confirm tailgate clearance with the bumper fitted
- Check hitch height and receiver pin alignment
- Plan for shackles and straps, which are sold separately
- Keep the license plate and tail lamps visible
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FS08-W1350-1 |
| UPC | 5810101336 |
| Product type | Full size rear bumper |
| Finish | 2 stage matte black powder coat |
| Steel construction | 3/16 in formed steel |
| Recovery points | 3/4 in D-rings, included |
| Mounts | 1/4 in keyed and gusseted |
| Position | Rear |
| Fit type | Direct fit |
| Tire carrier | None |
| Origin | Made in the USA |
Vehicle fitment
Fab Fours lists part FS08-W1350-1 for the 1999–2015 Ford F-250 Super Duty and the 1999–2015 Ford F-350 Super Duty.
Super Duty trucks from 2016 onward are not covered, and neither are F-150 pickups. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The listed years span several Super Duty generations, so compare your truck’s model year with the list. The original hitch and wiring locations are retained.
What’s included
One full size bumper with D-ring mounts and tailgate steps, matched to the Super Duty.
Not included: Shackles.
















