Overview
The Fab Fours Heavy Duty Rear Bumper with D-ring Mounts, part number CH11-W2150-1, is a matte black rear bumper for 2011–2014 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD trucks. D-ring recovery mounts are included.
The design centers on strength and durability. The 3/16-inch formed steel body has integrated steps on either side of the tailgate, and the bumper integrates the existing receiver hitch.
Key features
- Integrated steps on either side of the tailgate
- 3/16-inch formed steel construction
- 3/4-inch D-ring recovery points, D-ring mounts included
- 1/4-inch keyed and gusseted mounts
- 2 stage matte black powder coat; the -B suffix denotes bare steel
- Retains the OEM receiver hitch and wiring locations
Recovery mounts and shackles
D-ring recovery points are only as strong as the mount and the shackle that connects to them. Use rated shackles of the right size, seat the pin fully, and keep the strap or chain centered on the D-ring. Angled pulls put side load on the mounts, so line up the pull as closely as possible to avoid stressing the keyed and gusseted brackets.
Heavy duty rear bumpers see harder use than factory parts, so check the D-rings and mounting bolts after recovery work. Look for bent rings, cracked welds or bolts that have backed out. Tailgate steps take weight when you climb into the bed, so inspect their attachment points at the same time. Keeping the hitch clean and free of rust helps the receiver stay in good shape.
- Use shackles rated for the recovery load
- Check D-rings for bends after each recovery
- Retighten mount bolts after the first few trips
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | CH11-W2150-1 |
| UPC | 5810101213 |
| Product type | Heavy duty rear bumper |
| Finish | 2 stage matte black powder coat |
| Steel construction | 3/16 in formed steel |
| Recovery points | 3/4 in D-rings, included |
| Mounts | 1/4 in keyed and gusseted |
| Position | Rear |
| Fit type | Direct fit |
| Tire carrier | None |
| Origin | Made in the USA |
Vehicle fitment
Fab Fours lists part CH11-W2150-1 for the 2011–2014 Chevrolet Silverado 2500 HD and 3500 HD and the 2011–2014 GMC Sierra 2500 HD and 3500 HD.
Heavy duty trucks from 2010 and earlier or 2015 and later are not covered by this part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The existing receiver hitch and wiring locations carry over, so hitch use is unaffected. Shackles for the D-rings are added separately.
What’s included
One heavy duty rear bumper with D-ring mounts.
Not included: Shackles.












