Overview
The Fab Fours Elite Rear Bumper in black powder coat, part number NT16-U3750-1, is a steel rear bumper for the 2017-2018 Nissan Titan and 2016-2017 Nissan Titan XD.
Black Steel ELITE takes the ranch bumper design and combines it with the smooth plate look of the premium line, matched to the body lines of each model truck. It uses a combination of pipe and smooth plate construction, with pre-drilled sensor holes, and retains the OEM receiver hitch and wiring locations.
Key features
- Combination pipe and smooth plate construction
- Matte black powder coat finish
- Bare steel version available by using -B instead of -1 in the part number
- Pre-drilled sensor holes
- Retains OEM receiver hitch and wiring locations
- Matched to the body lines of the model truck
- 100% Made in the USA, per the manufacturer
Protecting the rear of a truck
A rear bumper does more than finish the look of a pickup. It carries the hitch receiver, supports the tail lights and sensors, and takes the first impact in a low-speed bump. Because the bumper bolts to the frame, the hitch mounts and bumper mounts share the load whenever a trailer is attached.
Owners who fit a new bumper often find that sensor location, backup lights and plate mounts need attention. Check that the wiring harness reaches the new openings and that sensors line up with their holes before final tightening. Steel adds weight at the rear, so suspension sag and tire wear are worth watching in the weeks after installation.
- Check sensor alignment before final tightening
- Inspect hitch mounting bolts after the first trailer trip
- Touch up bare steel edges to slow rust
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | NT16-U3750-1 |
| UPC | 5810113537 |
| Product type | Rear bumper |
| Series | Elite (Black Steel ELITE) |
| Position | Rear |
| Construction | Combination pipe and smooth plate |
| Finish | Matte black powder coat |
| Bare steel option | Part number ending -B instead of -1 |
| Sensor holes | Pre-drilled |
| Hitch and wiring | Retains OEM receiver hitch and wiring locations |
| Origin | 100% Made in the USA |
| Fitment type | Direct fit |
Vehicle fitment
Fits the 2017-2018 Nissan Titan (PRO-4X, Platinum Reserve, S, SL, SV) and the 2016-2017 Nissan Titan XD (PRO-4X, Platinum Reserve, S, SL, SV). Confirm the model and year before ordering.
The list covers the Titan for 2017-2018 and the Titan XD for 2016-2017, so it does not cover other Titan model years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test-fit the part before any cutting, drilling or finishing. Tighten fasteners to the required torque and re-check them after the first miles of driving. If the part needs cutting or drilling, wear eye protection and treat bare edges to prevent corrosion. Check local regulations on vehicle modification. For steps, bars and similar parts, make sure every fastener is tight and the part is secure before it carries any load.
What’s included
One Elite rear bumper in black powder coat, part number NT16-U3750-1.
Not included: Confirm whether mounting hardware and sensors are needed for your installation before starting.









