Select your vehicle

Fab Fours Full Size Rear Bumper (Black) – CH99-W1250-1

Fab Fours

Shop GMC Sierra 2500 HD Rear Bumpers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear bumper for 1999–2007 Silverado and Sierra 2500 and 3500
  • 3/16-inch formed steel, matte black powder coat
  • 3/4-inch D-ring recovery points included
  • Integrated tailgate steps

Description

Overview

The Fab Fours Full Size Rear Bumper, part number CH99-W1250-1, is a matte black rear bumper for 1999–2007 Chevrolet Silverado and GMC Sierra 2500 and 3500 trucks, including the 2007 Classic models. It integrates the existing receiver hitch and has D-ring recovery points.

The bumper is built for strength and durability. It is 3/16-inch formed steel with integrated steps on either side of the tailgate and 1/4-inch keyed and gusseted mounts.

Key features

  • Integrated steps on either side of the tailgate
  • 3/16-inch formed steel construction
  • 3/4-inch D-ring recovery points, D-ring mounts included
  • 1/4-inch keyed and gusseted mounts
  • 2 stage matte black powder coat; the -B suffix denotes bare steel
  • Retains the OEM receiver hitch and wiring locations

Fitting an older rear bumper

Bumpers for this range of trucks have often seen years of road salt and moisture, so inspect the rear frame before the new bumper goes on. Look at the crossmember, the hitch mount area and the bolt holes for rust, cracks or enlarged holes. Repair any weak area before fitting, since the new bumper loads these points during recovery.

Tailgate steps add convenience, but they put weight on the rear corners, so check that the step mounts are tight after the first few weeks. Matte black powder coat is durable, but chips at the bumper edges and mounts can start rust, so touch them up when you see them. Keep the D-ring mounts clean so the shackles seat properly.

  • Inspect the rear frame crossmember for rust
  • Check tailgate step mounts after a few weeks
  • Touch up chips at edges and mounts

Specifications

Brand Fab Fours
Part number CH99-W1250-1
UPC 5810101176
Product type Full size rear bumper
Finish 2 stage matte black powder coat
Steel construction 3/16 in formed steel
Recovery points 3/4 in D-rings, included
Mounts 1/4 in keyed and gusseted
Position Rear
Fit type Direct fit
Tire carrier None
Origin Made in the USA

Vehicle fitment

It fits the 1999–2000 Chevrolet Silverado 2500, the 2001–2006 Silverado 2500 HD and 3500, and the 2007 Silverado 2500 HD Classic and 3500 Classic. The GMC Sierra 2500 and 3500 equivalents cover the same years. Confirm fit for your vehicle’s year, model and trim before ordering.

The list does not include 1500 trucks or any 2008 and newer Silverado or Sierra models. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

This bumper spans several truck generations, so match the model-year range on your truck against the list. The factory receiver hitch and wiring locations are retained.

What’s included

One full size bumper for the 1999–2007 trucks, with D-ring mounts and integrated tailgate steps.

SKU: FFICH99-W1250-1 Category:

Specification

Shipping weight 190.00 lbs
Package dimensions 80.00 × 16.00 × 12.00 in
brands

Fitment

VehicleYearsTrims
Chevrolet Silverado 25001999–2000Base, LS, LT
Chevrolet Silverado 2500 HD2001–2006Base, LS, LT, WT
Chevrolet Silverado 2500 HD Classic2007LS, LT, WT
Chevrolet Silverado 35002001–2006Base, LS, LT, WT
Chevrolet Silverado 3500 Classic2007LS, LT, WT
GMC Sierra 25001999–2000SL, SLE, SLT
GMC Sierra 2500 HD2001–2006Base, SL, SLE, SLT, WT
GMC Sierra 2500 HD Classic2007SL, SLE, SLT, WT
GMC Sierra 35002001–2006Base, SL, SLE, SLT, WT
GMC Sierra 3500 Classic2007SL, SLE, SLT, WT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the CH99-W1250-1 fit the 2007 Classic Silverado?

Yes. It fits the 2007 Silverado 2500 HD Classic and 3500 Classic, and the matching 2007 GMC Sierra Classic models.

Are D-rings included with this Fab Fours rear bumper?

Yes. D-ring mounts are included with the CH99-W1250-1, and the bumper has 3/4-inch D-ring recovery points built in for use with shackles during recoveries.

Is the CH99-W1250-1 for half-ton trucks?

No. It is built for the 2500 and 3500 series Silverado and Sierra trucks, and half-ton 1500 trucks are not covered.

How do I check a steel rear bumper for rust?

Look at the welds, the mounting brackets and the bottom edges, where water collects. Tap suspicious areas with a hammer, since a dull sound can mean hidden rust inside the steel.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop GMC Sierra 2500 HD Rear Bumpers on Amazon