Overview
The Fab Fours Heavy Duty Rear Bumper with D-ring Mounts, part number DR09-W2950-1, is a black powder-coated rear bumper for 2009–2018 Dodge and Ram 1500, 2500 and 3500 trucks. It has integrated steps on either side of the tailgate and D-ring recovery points.
It is built from 3/16-inch formed steel with 1/4-inch keyed and gusseted mounts and a 2 stage black powder coat. The factory receiver hitch and wiring locations stay in place.
Key features
- Integrated steps on either side of the tailgate
- 3/16-inch formed steel construction
- 3/4-inch D-ring recovery points, D-ring mounts included
- 1/4-inch keyed and gusseted mounts
- 2 stage black powder coat; the -B suffix denotes bare steel
- Retains the OEM receiver hitch and wiring locations
Heavy duty rear bumper care
A heavy duty rear bumper spends its life in road spray, mud and occasional recovery loads, so its finish needs regular attention. Powder coat resists chips well at first, but exposed steel rusts quickly once the coating is broken. Wash the bumper with mild soap and water, rinse the mounting bolts, and inspect the coating after each season of salt or wet use.
Steps and D-ring mounts take repeated weight and load, so the mounting area should be checked at regular intervals. Look for cracked welds, loose gussets and rust creeping from under the coating. Keep hitch and wiring connectors sealed and dry, since corrosion there can cause lighting faults that are easy to miss.
- Touch up chips to keep steel sealed
- Check gussets and mount bolts each season
- Clean the tailgate steps after muddy trips
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | DR09-W2950-1 |
| UPC | 5810107581 |
| Product type | Heavy duty rear bumper |
| Finish | 2 stage black powder coat |
| Steel construction | 3/16 in formed steel |
| Recovery points | 3/4 in D-rings, included |
| Mounts | 1/4 in keyed and gusseted |
| Position | Rear |
| Fit type | Direct fit |
| Tire carrier | None |
| Origin | Made in the USA |
Vehicle fitment
Fab Fours lists part DR09-W2950-1 for the 2009–2010 Dodge Ram 1500, the 2010 Dodge Ram 2500 and 3500, the 2011–2018 Ram 1500, and the 2011–2017 Ram 2500 and 3500.
The Ram 2500 and 3500 are listed through 2017 only, and 2008 and earlier trucks are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Retains the OEM hitch and wiring locations. This bumper covers more than one Ram generation, so check the year range for your model.
What’s included
One heavy duty rear bumper with D-ring mounts.
Not included: Shackles.














