Overview
The Fab Fours Rear Base Bumper with D-ring and CB Antenna Mount, part number JK07-Y1251-1, is a black rear bumper for the 2007–2018 Jeep Wrangler JK, in both 2-door and 4-door models. It is made from 3/16-inch steel and finished in a 2 stage black powder coat.
The design uses Fab Fours’ signature knife edge and recessed D-ring mounts, and it adds a CB antenna mount. It integrates the existing receiver hitch, and the bumper is compatible with the factory hitch.
Key features
- Fits 2-door and 4-door Wrangler JK models
- 3/16-inch steel construction
- Signature knife edge with recessed D-ring mounts, D-ring mounts included
- CB antenna mount
- Compatible with the factory receiver hitch
- 2 stage black powder coat
Carrying a spare tire
A spare tire on the rear of a Wrangler changes the load on the bumper and hitch, so the carrier and mounting hardware deserve regular checks. The tire carrier is sold separately, so plan for it before the bumper goes on if a spare is part of the setup. Heavy spares and the carrier together can strain the hitch and the bumper welds, especially on rough trails. Check the hitch bolts and carrier fasteners after the first few drives.
The recessed D-ring mounts and knife edge design are often used with recovery straps and shackles, so inspect the mounts for bent plates and worn pins after recovery work. The CB antenna mount needs a clean, secure bracket and a routed cable that stays clear of the tire and any moving parts. Steel rear bumpers can rust at the welds, so wash off mud and salt and touch up chips in the coating promptly.
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | JK07-Y1251-1 |
| UPC | 700005149772 |
| Product type | Rear base bumper |
| Finish | 2 stage black powder coat |
| Steel thickness | 3/16 in |
| D-ring mounts | Included, recessed |
| Antenna mount | CB antenna |
| Position | Rear |
| Fit type | Direct fit |
| Tire carrier | Not included; sold separately as JP-Y1251T-1 |
Vehicle fitment
It fits 2007–2018 Jeep Wrangler JK models, in both 2-door and 4-door versions.
This bumper is for the JK generation only. Wrangler TJ and JL bodies are different generations and are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fab Fours designed the bumper to work with the factory receiver hitch, so the hitch does not need replacing. Mounting a spare tire requires the separate tire carrier.
What’s included
One rear bumper with D-ring mounts and a CB antenna mount.
Not included: Tire carrier. The matching carrier is offered separately as part number JP-Y1251T-1.


















