Overview
The Fab Fours Rear Ranch Bumper, part number DR03-T1050-B, is a bare steel pipe and tread plate rear bumper for the 2003–2009 Dodge Ram 2500 and 3500. It includes back up lights and pre-drilled sensor holes.
Fab Fours took the ranch bumper and gave it the styling used in its heavy duty plate bumpers, matching the body lines of each model truck. The -B suffix marks the bare steel version, while a gloss black powder coat version ends in -1.
Key features
- Combination pipe and tread plate construction
- Bare steel finish
- Back up lights included
- Pre-drilled sensor holes
- Retains the OEM receiver hitch and wiring locations
- 100% made in the U.S.A.
Keeping rust off a rear bumper
A rear bumper sits in the spray path from the tires, so bare steel will rust faster than a finished part unless it is sealed. Remove any mill scale and oil, then apply a primer and a topcoat rated for steel. Paint the edges and the inside of the tube sections, since moisture collects in those spots.
Rear bumpers also carry the back up lights, so keep the wiring harness away from moving parts and the trailer hitch path. Test the lamps with the reverse gear engaged before final tightening. Pre-drilled sensor holes should be checked for burrs and cleaned before any sensors are fitted.
- Sand off surface rust before priming
- Touch up chips as soon as they appear
- Inspect welds after the first trail or hitch use
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | DR03-T1050-B |
| UPC | 5810104382 |
| Product type | Rear ranch-style bumper |
| Construction | Pipe and tread plate |
| Finish | Bare steel |
| Back up lights | Included |
| Sensor holes | Pre-drilled |
| Position | Rear |
| Fit type | Direct fit |
| D-ring mounts | Not included |
| Tire carrier | None |
| Origin | Made in the USA |
Vehicle fitment
Fab Fours lists part DR03-T1050-B for the 2003–2009 Dodge Ram 2500 and the 2003–2009 Dodge Ram 3500.
Ram 1500 trucks and 2010 and later heavy duty models are not covered by this part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Wire the included back up lights during installation. As the steel is bare, a coating is left to the owner.
What’s included
One ranch rear bumper with back up lights.
Not included: D-ring mounts and any paint or coating.









