Overview
The Fab Fours Heavy Duty Rear Bumper with D-ring Mounts in bare steel, part number DR09-W2950-B, fits 2009–2018 Dodge and Ram 1500, 2500 and 3500 trucks. It integrates the existing receiver hitch and adds D-ring recovery points.
The design is built for strength and durability. The bumper uses 3/16-inch formed steel with integrated steps on either side of the tailgate. The bare finish means any paint or coating is left to the owner.
Key features
- Bare steel finish
- Integrated steps on either side of the tailgate
- 3/16-inch formed steel construction
- 3/4-inch D-ring recovery points, D-ring mounts included
- 1/4-inch keyed and gusseted mounts
- Retains the OEM receiver hitch and wiring locations
Painting bare steel
Bare steel rear bumpers rust when moisture and road salt sit on unprotected metal, so coating is part of the install. Clean and degrease the bumper, scuff the surface, then apply a primer and topcoat designed for steel. Paint the cut edges and the inside of the mounts too, since those areas are often missed and start rusting first.
Steps on the tailgate sides see foot traffic and road spray, so they often wear first. Check the welds and mounts after the first few months, and touch up any scratches before rust forms. Keep the receiver hitch clean and free of grit so it does not trap moisture against the bumper.
- Degrease before priming
- Coat the mount surfaces and inside edges
- Inspect welds and gussets once a season
- Touch up chips quickly
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | DR09-W2950-B |
| UPC | 5810107598 |
| Product type | Heavy duty rear bumper |
| Finish | Bare steel |
| Steel construction | 3/16 in formed steel |
| Recovery points | 3/4 in D-rings, included |
| Mounts | 1/4 in keyed and gusseted |
| Position | Rear |
| Fit type | Direct fit |
| Tire carrier | None |
| Origin | Made in the USA |
Vehicle fitment
Fab Fours lists part DR09-W2950-B for the 2009–2010 Dodge Ram 1500, the 2010 Dodge Ram 2500 and 3500, the 2011–2018 Ram 1500, and the 2011–2017 Ram 2500 and 3500.
The 2018 Ram 2500 and 3500 are not on the list, and neither are trucks from 2008 and earlier. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bare steel should be painted or coated before installation to slow rust. The existing hitch and wiring locations are retained.
What’s included
One bare steel heavy duty rear bumper with D-ring mounts.
Not included: Shackles and any paint or coating.














