Smittybilt
Showing 433–480 of 1168 resultsSorted by popularity
-
Rear Bumpers
Smittybilt XRC Atlas Rear Bumper and Tire Carrier (Black) – 76896
- Rear bumper with integrated tire carrier for 2-door and 4-door models
- Holds tires up to 37 inches; Class III tow rated hitch
- Mounting points for a gas can and jack, plus a 3rd brake light bracket
- Two-stage textured matte black finish on 3/16 cold rolled steel
SKU: S/B76896 -
Front Bumpers
Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes (Black) – 76892
Front BumpersSmittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes (Black) – 76892
- XRC Atlas full-width front bumper with grill guard, part 76892
- 3/16 inch steel, textured matte black, three-piece design
- Clearance for up to 37 inch tires
- Two 3/4 inch D-ring mounts, fog light holes; bolts on
SKU: S/B76892 -
-
Tube Fenders
Smittybilt XRC Front Fender Armor (Black) – 76880
- Front fender armor for Jeep Wrangler JK, 2007-2018, 2- and 4-door models
- 3/16-inch cold rolled steel with a two-stage matte black powder coat
- Includes inner fender liner, replaceable slide plates and stainless steel hardware
- Part number 76880, sold as a pair
SKU: S/B76880 -
-
Rear Bumpers
Smittybilt XRC Gen2 Rear Bumper (Black) – 76858
- Rear bumper for the 2007–2018 Jeep Wrangler JK, 2-door and 4-door
- 3/16-inch cold rolled steel with textured matte black powder coat
- Class III receiver hitch, D-ring mounts and LED lights included
- Tire carrier can be added later (not included)
SKU: S/B76858 -
Tire Carriers
Smittybilt XRC Tire Carrier (Tan) – 76857TAN
- Tan tire carrier for Smittybilt Gen2 XRC and SRC bumpers
- Fits 2007 to 2018 Jeep Wrangler JK, 2-door and 4-door
- Two-stage textured tan finish over 3/16 inch cold-rolled steel
- Includes Roto Pax and CB antenna mounts
- Part 76857-01 required with non-Smittybilt bumpers
SKU: S/B76857TAN -
-
-
Fender Flares
Smittybilt XRC Flux Rear Fender Flare Set (Paintable) – 76839
- Made for 2007-2016 and 2018 Jeep Wrangler JK, 2-door and Unlimited
- Rear flares sold as a pair, 6 inch wide double articulation tube fenders
- Extra outer tire clearance under full suspension articulation
- Bolts to the factory mounting points with spacers and brackets included
- 3/4 inch LED turn signal lights included
SKU: S/B76839 -
-
-
-
Front Bumpers
Smittybilt XRC M.O.D. Modular Center Section with Winch Plate and D-ring Mounts (Black) – 76825
Front BumpersSmittybilt XRC M.O.D. Modular Center Section with Winch Plate and D-ring Mounts (Black) – 76825
- Center section of the JK XRC M.O.D. bumper system
- Winch plate for a winch up to 15,000 lb
- 3/16 inch steel, textured matte black, welded D-ring mounts
- Add mid or full width end plates and a bull bar or stinger
SKU: S/B76825 -
-
Front Bumpers
Smittybilt XRC Gen2 Front Bumper W/Winch Plate – Black Textured (Black) – 76807
- Fits 2007-2018 Jeep Wrangler JK (2 and 4 door)
- XRC Gen2 front bumper, 3/16 inch steel, textured matte black
- Winch ready up to a 10,000 lb rating, OE fog light ports
- PP+TPO slip strips, 1.75 inch kickers, D-ring and jack points
SKU: S/B76807 -
Front Bumpers
Smittybilt XRC Rock Crawler Winch Front Bumper with Grill Guard and D-ring Mounts (Black) – 76800
Front BumpersSmittybilt XRC Rock Crawler Winch Front Bumper with Grill Guard and D-ring Mounts (Black) – 76800
- XRC full-width front bumper with grill guard, part 76800
- 3/16 inch steel, two-stage textured matte black
- Winch mount for winches up to 10,000 lb
- Two light tabs; complete bolt-on, 5-year limited warranty
SKU: S/B76800 -
-
-
Front Bumpers
Smittybilt SRC Gen2 Front Bumper – Black Textured (Black) – 76724
- SRC Gen2 full-width front bumper, part number 76724
- 3/16 inch cold rolled steel, textured matte black
- Lower winch plate rated up to 12k, raised corners
- Solid D-ring and jack point mounts; 5-year limited warranty
SKU: S/B76724 -
Front Bumpers
Smittybilt SRC Front Grille Guard Bumper with D-ring Mounts (Black) – 76721
- Full-width SRC front grille guard bumper, part 76721
- 2 inch tube and 1/4 inch plate steel, textured black
- Wide winch opening, four light taps, welded D-ring tabs
- Bolt-on, no drilling; 5-year limited warranty
SKU: S/B76721 -
-
Rear Bumpers
Smittybilt XRC Rear Tire Carrier Bumper (Black) – 76653
- Fits 2004–2006 Wrangler (LJ) Unlimited, 1997–2006 Wrangler (TJ) and 1987–1995 Wrangler (YJ)
- Black powder coat rear tire carrier bumper
- Built-in Class III receiver hitch and two D-ring mounts
- 3/16-inch cold rolled steel construction
- Bumper only; tire carrier sold separately as part 76654
SKU: S/B76653 -
Rear Bumpers
Smittybilt SRC Gen2 Rear Bumper (Black) – 76614
- Fits 2007–2018 Jeep Wrangler (JK) two-door and four-door models
- Class III receiver hitch built into the bumper
- Solid plate center sections protect frame horns and crossmembers
- Two D-ring mounts, plus a 3/4-inch shackle recommendation
- Backup light cut-out with lights included
SKU: S/B76614 -
-
Front Bumpers
Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black (Black) – 76524
Front BumpersSmittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black (Black) – 76524
- Fits 2007-2018 Jeep Wrangler JK, 2-door and 4-door
- 2 inch DOM tubing with 3/16 inch steel base
- Welded D-ring mounts, light mounts and winch mount included
- Textured black finish with 5-year limited warranty
SKU: S/B76524 -
Replacement Hoods
Smittybilt SRC Stingray Vented Hood – 76400
- SRC Stingray vented hood for 2007-2018 Jeep Wrangler JK, 2-door and 4-door models
- 0.8mm steel with a 0.2mm e-coat, ready for paint
- Vents hot gases out of the engine bay; 8.7mm underbody insulation mat
- Factory crumple zones retained; hood nozzles included
SKU: S/B76400 -
Paint Protectors
Smittybilt Limb Risers – 7613
- Limb riser kit for 1984-1996 and 1999-2001 Jeep Cherokee XJ models
- 1/4-inch nylon-coated cable with turnbuckle tension adjustment
- All hardware included; minor drilling required
- Keeps branches off the windshield to prevent scratches and cracks
SKU: S/B7613 -
-
-
Hood Latch Assembly
Smittybilt Locking Hood Latches (Chrome) – 7591
- Chrome locking hood latches for 1997-2006 Jeep Wrangler TJ and 2004-2006 LJ models
- Replaces factory rubber hood catches with lockable latches
- Both latches are keyed alike; sold as a pair
- Installs in factory mounting holes with no drilling
SKU: S/B7591 -
-
-
-
-
-
Seat Covers
Smittybilt XRC Rear Seat Cover (Black) – 756115
- XRC rear seat cover in Black/Black, part number 756115
- Tailored fit for the factory fold-and-tumble rear bench seat
- Mil Spec fabric and vinyl; not waterproof
- Matches the XRC front seats; easy installation
- Fits 1997 to 2002 Jeep Wrangler (TJ) models
SKU: S/B756115











































