Overview
The Smittybilt XRC Flux Rear Fender Flare Set, part number 76839, is a pair of double articulation tube fenders for the rear of the 2007–2016 and 2018 Jeep Wrangler (JK), 2-door and Unlimited models.
The flares give extra outer tire clearance for larger tires under full suspension articulation. The double articulation tube design adds an extra 3 inches of suspension travel. They are 6 inches wide, made from CNC bent 1.5 inch diameter tubes covered with 1/8 inch laser cut cold rolled sheet metal, and they keep the factory inner liner in place.
Key features
- Rear flares sold as a pair
- 6 inch wide double articulation tube fenders
- CNC bent 1.5 inch diameter tubes covered with 1/8 inch laser cut cold rolled sheet metal
- Extra outer tire clearance under full suspension articulation
- Bolts to the factory mounting points with minimal modification
- Spacers and brackets included for extra strength
- 3/4 inch LED turn signal lights included
- Preserves the factory inner liner
Rear clearance and tire size
Rear flares matter most when larger tires are on the vehicle, since the tire can move up and out under full suspension articulation. Double articulation tubes allow the flare to follow that movement, while the tube and sheet metal design keeps the outline fairly slim. Check the rear tire to flare gap at both full compression and full droop before heading to rough terrain.
Spacers and brackets carry the load at the mounting points, so check them after rough trails. Keep the factory inner liner in place, as it protects the rear body and wiring behind the tires. Lights and wiring can rub or loosen when the tire moves, so inspect them occasionally.
- Check the tire gap at full droop
- Inspect spacers and brackets after rough trails
- Keep the inner liner in place
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 76839 |
| UPC | 631410125986 |
| Position | Rear |
| Width/coverage | 6 inches |
| Quantity | Sold as a pair |
| Tube diameter | 1.5 inches |
| Sheet metal | 1/8 inch cold rolled steel, laser cut |
| Lighting | 3/4 inch LED turn signals included |
| Suspension travel | Extra 3 inches |
| Fit type | Direct fit |
Vehicle fitment
The set is made for the 2007-2016 and 2018 Jeep Wrangler JK, including 2-door and Unlimited models of that generation.
The 2017 Wrangler JK and the Wrangler JL are outside this set’s design. For those, confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires minimal modification. The flares bolt to the factory mounting points, and the included spacers and brackets add strength. Keep the factory inner liner in place, since the flares are designed to preserve it.
What’s included
The pair includes the rear flares, the spacers and brackets, and the 3/4 inch LED turn signal lights.
































