Overview
The Smittybilt XRC Gen2 Rear Bumper, part number 76858, is a black steel rear bumper for the 2007–2018 Jeep Wrangler JK, in both 2-door and 4-door versions. It is the second generation of Smittybilt’s XRC rear bumper and is built from 3/16-inch cold rolled steel with a two-stage textured matte black finish.
Raised corners give the bumper better approach and departure angles for vehicles running oversized tires. The D-ring mounts and jack point mount are solid and are welded on the inside and outside, and the rear bumper also carries a Class III receiver hitch, so one bumper covers both recovery and towing.
Key features
- Fits the 2007–2018 Jeep Wrangler JK, 2-door and 4-door
- Made from 3/16-inch cold rolled steel with a two-stage textured matte black powder coat finish
- Solid D-ring and jack point mount, welded on the inside and out
- Raised corners for better entry and exit angles
- Class III hitch for towing, with an anti-rattle provision for the receiver
- Cut-out for an auxiliary back-up light
- Modular design, so a tire carrier can be added in the future
- LED lights included
Towing and recovery use
A rear bumper with a receiver hitch serves two jobs: pulling a trailer and recovering a stuck vehicle. The hitch should be used only within the rating of the receiver and the tow vehicle, and the load should sit close to the hitch point to keep the rear end stable. Recovery is harder on a bumper than towing, because a sudden jerk puts shock through the welds and mounts, so those points deserve regular inspection.
Check the bumper mounts and the rear body connections by looking at the bolts after the first few miles and again after each season. A tire carrier can be added later, and if one is fitted its weight shifts the load well behind the axle, so the hitch and bumper should be checked for clearance and stress. Keep the light wiring in good condition, with connectors sealed against water and mud.
- Stay within the receiver and tow vehicle ratings
- Inspect welds after any hard recovery
- Seal light connectors against water
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 76858 |
| UPC | 631410125641 |
| Product type | Rear bumper |
| Position | Rear |
| Material | 3/16-inch cold rolled steel |
| Finish | Two-stage textured matte black, powder coat |
| Receiver hitch | Yes, Class III, with anti-rattle provision |
| D-ring mounts | Included, towable |
| Tire carrier | Not included (can be added later) |
| Lights | LED lights included |
| Fit type | Direct fit |
| Warranty | 5-year limited on the finish; Smittybilt limited lifetime warranty |
Vehicle fitment
The XRC Gen2 Rear Bumper 76858 fits the 2007-2018 Jeep Wrangler JK in 2-door models and the matching Unlimited 4-door versions. It covers Sport, Sport S, X, Sahara, Rubicon and the 70th and 75th Anniversary editions.
It does not fit the TJ, LJ or JL generations. Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
The bumper with its welded D-ring and jack point mounts, the Class III receiver hitch and the LED lights, all of which Smittybilt includes with the bumper.
Not included: the tire carrier, which Smittybilt sells separately as part S/B76857.
































