Overview
The Smittybilt XRC Full Rear Corner Armor (part 76882) is a matte black steel corner guard for the 4-door Jeep Wrangler JK, 2007 to 2018. The XRC JK full rear corners were engineered to protect the rear of the vehicle and keep clearance when wheeling through rough terrain.
Each corner is cold rolled steel finished in a two-stage matte black powder coat. Stainless steel fasteners come with every corner, and installation requires no cutting or drilling.
Key features
- Full rear corner design for 4-door models
- Two-stage matte black powder coat
- Stainless steel fasteners included
- No cutting or drilling required
- Engineered for protection and clearance on the trail
Bolt-on installation tips
A bolt-on corner armor saves time because no drilling is involved, but the fit still needs attention. Set the corner in place by hand first, then tighten the fasteners in stages so the piece settles evenly against the body.
Watch the clearance to the rocker area and the rear tire during full steering movement. A piece that sits close to the body can rub on paint, so adjust the position before final tightening.
Trail vibration can loosen any fastener over time. Check the bolts after the first few runs and keep a spare fastener on hand. Cold rolled steel can show surface rust where the powder coat is chipped, so touch up small chips early.
- Hand-start every fastener
- Tighten in stages
- Check clearance at full turn
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 76882 |
| UPC | 631410091373 |
| Material | Cold rolled steel |
| Finish | Two-stage matte black powder coat |
| Corner type | Full |
| Hardware | Stainless steel |
| Installation | No cutting or drilling required |
| Body style | 4-door models |
Vehicle fitment
This armor is for the 4-door Jeep Wrangler JK, which the JK chassis code places at 2007 to 2018. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because no drilling is needed, the armor is a bolt-on job with the included stainless fasteners. Set the corner in place and check that it clears the body and the rocker area before tightening anything.
What’s included
One full rear corner armor with stainless steel fasteners.


























