Overview
The Smittybilt Limb Risers, part number S/B7613, are a limb riser kit for the 1984-1996 and 1999-2001 Jeep Cherokee (XJ), across the Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport versions. The kit lifts overhanging branches away from the vehicle so they do not strike the windshield.
The kit protects the windshield from scratches or cracks caused by branches. It uses a 1/4-inch nylon-coated cable, and the tension is adjusted with turnbuckles. All hardware is included, and minor drilling is required.
Key features
- 1/4-inch nylon-coated cable
- Turnbuckle tension adjustment
- All hardware included
- Protects the windshield from branch damage
- Minor drilling required
Branch strike and cable care
Limb risers are most useful on trails where low branches cross the path, since they lift the overhang before it reaches the glass. A cable setup is simple, but it still needs regular attention. Brush and sap can build up on the cable, and grit can wear the nylon coating where it rubs against hardware.
Cable tension has a direct effect on how the riser behaves. Too little tension lets the cable sag into the path of branches, while too much strains the mounts. Adjust both turnbuckles evenly, then recheck after the first few outings, when the mounts may settle.
- Inspect cable sleeves for nicks after brush runs
- Recheck turnbuckle tension after the first few outings
- Keep the nylon coating clean and free of sap
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | S/B7613 |
| UPC | 631410129625 |
| Cable | 1/4-inch nylon-coated |
| Tension | Adjustable with turnbuckles |
| Included | All hardware |
| Installation | Minor drilling required |
| Fitment | Direct fit |
Vehicle fitment
It fits the 1984-1996 and 1999-2001 Jeep Cherokee (XJ), across the Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport versions.
It does not fit the 1997-1998 model years or the Grand Cherokee and Wrangler. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Minor drilling is required for installation, so plan the mounting points before starting. Keep the cable tension even using the turnbuckles, so the riser holds its position.













