Overview
The Smittybilt SRC front stinger, part number 76521, is a stubby-width steel stinger that mounts to a winch bumper to add ground clearance and tube protection. It is made from 2 inch DOM tubing and 3/16 inch cold rolled steel, finished in textured matte black, with welded D-ring mounts.
The stingers are hand crafted from DOM 1020 2 inch tubing, with a base of 3/16 inch cold rolled steel and reinforced gussets. The D-ring mounts are welded inside and out, and the stinger works with various winch plates.
Key features
- 2 inch DOM steel tubing
- Base in 3/16 inch cold rolled steel with reinforced gussets
- D-ring mounts welded on the inside and outside
- Textured matte black finish
- Can be used with various winch plates
- Clearance for approach and departure angles
- 5-year limited warranty
Clearance and stinger choice
A front stinger sits below the bumper line and carries the winch plate, which makes it the point of most contact on rough ground. Its job is to raise the lowest point of the front end and protect the tubing from rocks and ledges. Ground clearance and approach angle both depend on how far the stinger reaches forward, so look at the overall shape before choosing a width.
Stinger work usually goes with other front-end changes. A winch plate, a bumper and the light setup all share the same mounting space, so plan them together. Check how each piece sits against the others, and confirm the stinger clears the tires at full steering lock.
- Measure approach angle with the stinger in place
- Check tire clearance at full steering lock
- Plan the winch plate and lights together
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 76521 |
| UPC | 631410089806 |
| Product type | Front stinger, SRC series |
| Position | Front |
| Width | Stubby |
| Material | Steel: 2 inch DOM 1020 tubing, 3/16 inch cold rolled base |
| Finish | Powder coat, textured matte black |
| D-ring mounts | Included |
| Winch mount | Not included |
| Light mounts | Not included |
| Warranty | 5-year limited |
Vehicle fitment
It is a direct-fit front stinger. Part number 76521 is not tied to a named vehicle, so confirm which Smittybilt SRC bumper or winch plate it pairs with before ordering.
Confirm which Smittybilt SRC bumper or winch plate this stinger pairs with before ordering. The related JK stinger, part 76524, is a separate part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stinger is made to be used with various winch plates, so check it against the plate or bumper you plan to mount it on. The winch mount and the light mounts are not part of this part.
What’s included
- SRC front stinger in textured matte black
- D-ring mounts welded to the stinger
Not included: a winch mount, light mounts and the winch.


























