Overview
The Smittybilt SRC Stingray Vented Hood, part number S/B76400, is a steel replacement hood for 2-door and 4-door 2007-2018 Jeep Wrangler JK models, including the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport and X versions. The vented design gives the JK a more aggressive look and helps vent hot gases from the engine bay.
The hood is made from 0.8mm steel and paired with an 8.7mm underbody insulation mat. It accepts the factory hardware and has a black e-coat finish that is ready for paint without further preparation. The factory crumple zones are retained.
The vents let hot gases out of the engine bay. The 8.7mm underbody insulation mat is part of the hood design.
Key features
- Precision steel construction
- Vents hot gases out of the engine bay
- Factory crumple zones retained
- 0.8mm steel hood with a 0.2mm e-coat
- 8.7mm underbody insulation mat
- Hood nozzles included
- Accepts factory hood latch and hood mount hardware
Painting and under-hood heat
A replacement hood is often the first body panel that shows wear from sun and stone chips. The e-coat base protects the steel, but a topcoat gives a longer-lasting color match and a better barrier against moisture. Prep the surface by cleaning off oil and fingerprints, then use a primer suited to bare e-coat before applying color.
Vented hoods change airflow under the hood, so the insulation mat and the vent openings should stay intact. Keep debris out of the vents and check that the mat stays fastened when you inspect the engine bay. Periodically check the hood latch and mount points, since a hood that shifts can alter the gap to the fenders.
- Clean oil and fingerprints before painting
- Use a primer suited to e-coat
- Keep vents clear of debris
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | S/B76400 |
| UPC | 631410125689 |
| Material | Steel |
| Steel thickness | 0.8mm |
| E-coat | 0.2mm, ready for paint |
| Underbody insulation mat | 8.7mm thick |
| Included | Hood nozzles |
| Warranty | Smittybilt Advantage Warranty |
| Fitment | Direct fit |
Vehicle fitment
The hood fits the 2007-2018 Jeep Wrangler JK, 2-door and 4-door models, across the versions named above.
Confirm fit for your vehicle’s year, model and trim before ordering, particularly for TJ, LJ or JL Wranglers.
Installation notes
The hood uses the factory hood latch and hood mount hardware, so no new mounting points are needed. Because the finish is e-coat only, the hood should be painted before it is put in service if a color match is wanted.

























