Overview
The Smittybilt SRC front grille guard bumper, part number 76721, is a full-width steel front bumper from the Rock Crawler Series with welded D-ring tabs and a wide opening for a winch. It is built from 2 inch tubing plus 1/4 inch steel plate, finished in textured black powder coat.
The bumper has sloping ends for greater tire travel and better entry and exit, and four taps for mounting lights. It bolts directly to the vehicle without drilling or modifications and includes 1/4 inch thick custom mounting brackets. It carries a 5-year limited warranty.
Key features
- 2 inch tube construction with 1/4 inch steel plate
- Textured black powder coat
- Sloping ends for greater tire travel and improved entry and exit
- Four taps to mount lights
- Wide opening allows winch installation
- 1/4 inch thick custom mounting brackets
- Welded D-ring tabs
- Bolts directly on; no drilling or modifications
Winch and light planning
A front grille guard with an open center is often used as a mounting base for recovery gear and auxiliary lights. Before adding a winch, decide where the cable will run and how the plate will sit behind the opening. The fairlead position affects how the winch load reaches the bumper, so matching the winch to the plate matters more than the opening size alone.
Lights mounted to the four light taps need careful wiring. Plan the harness route before drilling any connectors, keep wires clear of moving suspension parts, and use a relay and fuse suited to the lights chosen. Inspect the brackets and mounting hardware after rough trail use to catch loose fasteners early.
- Choose the winch and plate together before mounting
- Plan the light harness route before wiring
- Keep wires clear of suspension and steering parts
- Inspect brackets after rough trail use
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 76721 |
| UPC | 631410079791 |
| Product type | Front grille guard bumper, SRC series |
| Position | Front |
| Width | Full |
| Material | Steel: 2 inch tube and 1/4 inch plate |
| Finish | Powder coat, textured black |
| D-ring mounts | Included (welded tabs) |
| Light mounts | Included |
| Winch mount | Not included |
| Warranty | 5-year limited |
| Fit type | Direct fit |
Vehicle fitment
This bumper is a direct fit, bolt-on design. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm fit for your vehicle’s year, model and trim before ordering, and check that the bumper’s mounting points line up with your frame.
Installation notes
The bumper is meant to bolt directly to the vehicle with no drilling or modifications. The opening is wide enough for a winch, but the winch mount is not part of this bumper, so choose your winch and plate before installing.
What’s included
- SRC front grille guard bumper
- Welded D-ring tabs
- Light mounts (four taps)
- 1/4 inch mounting brackets
Not included: a winch mount, the winch and lights.




























