Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers
Showing 1249–1260 of 3453 resultsSorted by popularity
-
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999152
- Front RS9000XL Series shock absorber, part number RS999152, rated for 1.5 to 2.5 in. of lift
- Fits 1988-2000 Chevrolet and GMC K1500 and K2500 trucks and Suburbans, Blazer, Tahoe and Yukon per the list
- 9-position manual/remote tuning with an 18mm chrome rod
- 2.75-in. (70mm) body, nitrogen gas charged
- Polyurethane bushings and protective boot included
SKU: RANRS999152 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999151
- Front position; fits 1968–1991 Chevrolet and GMC K and V series pickups, Suburbans and Blazers
- Direct-fit RS9000XL gas-charged shock
- 2.75-in. (70mm) body with 18mm chrome rod
- Lift height is w/0 – 2 in. lift.
- Protective boot included
SKU: RANRS999151 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999150
- Front RS9000XL Series shock, part number RS999150, for Chevrolet and GMC trucks and SUVs
- Fits 1988-2000 Chevrolet and GMC K1500, K2500 and K3500 models, Tahoe, Yukon, Blazer and Escalade per the list
- 9-position myRide manual/remote tuning with an 18mm chrome rod
- 2.75-in. (70mm) body, nitrogen gas charged
- Rated for w/0 in. lift or drop
SKU: RANRS999150 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999145
- Front RS9000XL Series shock absorber, part number RS999145, for Toyota trucks
- Fitment per manufacturer list: 1986-1995 Toyota 4Runner and Pickup, 1993-1998 Toyota T100
- 9-position myRide manual/remote tuning with an 18mm chrome rod
- 2.75-in. (70mm) body diameter, nitrogen gas charged
- Rated for 0 to 1 in. of lift; protective boot included
SKU: RANRS999145 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999143
- Rancho RS999143 rear RS9000XL shock absorber, designed for a 4 in. lift.
- Fitment list covers 1961–1973 Dodge W100, W200 and W300 pickups and 1984–1985 Toyota 4Runner and Pickup.
- 2.75 in. (70mm) body with an 18mm chrome rod.
- Carries a limited lifetime warranty.
SKU: RANRS999143 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999136
- Rancho RS999136 RS9000XL Series gas-charged shock absorber
- 2.75-in. (70mm) body diameter and 18mm chrome rod
- 9-position manual or remote tuning system
- Liquid metallic finish and polyurethane bushings
- No vehicle fitment listed; Direct Fit label only
SKU: RANRS999136 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999129
- Rancho RS999129 rear RS9000XL shock absorber, designed for a 0 to 1.5 inch lift.
- Fitment list covers 1984–2001 Jeep Cherokee (XJ) and 1984–1990 Jeep Wagoneer (SJ).
- 18mm piston rod with 9-position manual or remote tuning.
- Nitrogen gas charged, protective boot included.
SKU: RANRS999129 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999128
- Rancho RS999128 RS9000XL Series front shock absorber
- Lift range printed as 0 to 1? and unclear
- 18mm piston rod, 9-position manual or remote tuning
- Gas charged with nitrogen, protective boot included
- No vehicle fitment listed
SKU: RANRS999128 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999126
- Rear position; fits 1983–2011 Ford Ranger models
- Direct-fit RS9000XL gas-charged shock
- 2.75-in. (70mm) body with 18mm chrome rod
- Lift height is w/0 – 2.5 in. lift, meaning stock-height trucks up to 2.5 in. of lift.
- Protective boot included
SKU: RANRS999126 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999124
- Rancho RS999124 rear RS9000XL shock absorber, listed with 0 in. lift/drop.
- Fitment list covers 1982–2004 Chevrolet, GMC, Cadillac, Dodge, Isuzu and Oldsmobile models.
- 18mm chrome rod, 2.75 in. (70mm) body and 9-position tuning.
- Covered by a limited lifetime warranty.
SKU: RANRS999124 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999123
- Front position; fits 1983 to 2005 Chevrolet, GMC, Isuzu and Oldsmobile trucks and SUVs
- Direct-fit RS9000XL gas-charged shock
- 2.75-in. (70mm) body with 18mm chrome rod
- 9-position tuning, manual or remote
- Protective boot included
SKU: RANRS999123 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999120
- Rancho RS9000XL Series shock absorber, part number RS999120
- Made for Jeep vehicles; confirm year, model and trim before ordering
- 18mm diameter piston rod
- 9-position manual or remote tuning
- Nitrogen gas charged, with a protective boot included
SKU: RANRS999120
What a shock absorber does
A shock absorber is a damper. The spring holds the vehicle up, and the shock controls how fast that spring moves. Without working dampers a truck bounces repeatedly after every bump, tires lose contact with the ground, and braking and steering suffer. Off-road, shocks also absorb heat from constant motion, which is why fade becomes a concern on long, rough stretches.
Key specifications to compare
- Collapsed and extended length: These two numbers set the travel (extended minus collapsed). The shock must be long enough that it never limits suspension travel or bottoms out before the bump stops do, and short enough that it is not the first thing to run out at full droop.
- Mounts: Bar pin, stem, eyelet and bolt-in ends are not interchangeable without hardware. Match both the upper and lower mount styles to your vehicle.
- Body design: Monotube shocks usually run cooler and resist foaming better. Twin-tube shocks are common as stock replacements and are often quieter and lower in cost. Many listings state the body diameter, such as a 46mm smooth body.
- Reservoir: An external reservoir adds oil volume and gas capacity, which helps with heat in hard or sustained use.
- Shaft diameter: A larger shaft is generally more resistant to bending.
Choosing for your use
For a daily driver with a modest lift, a quality non-adjustable monotube or gas-charged twin-tube shock sized for your lift height is usually enough. If you tow, carry a heavy bumper and winch, or run fast desert roads, look at larger bodies, reservoirs and tunable valving. Pair the shock with the right spring rate; a shock cannot make up for a spring that is too soft or too stiff for the load.
Fitment and installation
Shocks are specific to lift height, axle and whether they are front or rear, so confirm fitment for your exact year, make and model and check the manufacturer's specifications. Replace shocks in axle sets, since one new and one worn shock gives uneven handling. Support the axle before removal so it cannot droop and stretch brake lines, and tighten fasteners to the specified torque. If you changed ride height, have the alignment checked afterward.
A final point on tuning: if a shock offers adjustable damping, change one setting at a time and note the result on a familiar road. Heavier loads, such as a winch bumper, roof tent or camping gear, often call for firmer valving than an empty truck. Inspect boots, bushings and mounting hardware at every oil change, since a worn bushing can mimic a failing shock.
Mistakes to avoid
The most common error is choosing shocks by brand or price without checking the length numbers. A shock that is too short lets the axle droop until the springs unseat or brake lines tighten, while one that is too long bottoms out and can bend the shaft or damage the mounts. Measure from mount to mount at ride height, then at full droop and full compression, and compare with the listed collapsed and extended lengths.
- Do not ignore worn bushings, since new shocks with tired bushings still clunk.
- Do not use a shock as a travel limiter; bump stops and limit straps do that job.
- Do not install shocks with the vehicle hanging from the frame and the springs unloaded, because mounts then sit in the wrong position.
Test drive on a familiar road after installation and listen for rattles before heading onto the trail.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Shock Absorbers brands
- Pro Comp Suspension (898)
- Bilstein (615)
- Rancho (567)
- Fox Racing Shox (345)
- Skyjacker (279)
- Fabtech (232)
- ARB 4x4 Accessories (136)
- FOX (85)
- ICON Vehicle Dynamics (84)
- Rubicon Express (78)
- Icon Suspension (77)
- King Shocks (71)
Shock Absorbers FAQ
How do I know when shocks are worn out?
Common signs are oil leaking down the body, a bouncy or floaty ride, nose dive under braking, uneven tire wear and clunking from the mounts. A worn shock may also feel hot or weak when you compare it with a new one.
What is the difference between monotube and twin-tube shocks?
A monotube has a single working chamber with a floating piston separating oil and gas, which tends to shed heat well. A twin-tube uses an inner and outer tube and is common in factory-style replacements. Both can work well when matched to the vehicle.
Do I need new shocks after a lift?
Usually yes. A lift changes the distance between the mounts, so stock shocks may limit travel or bottom out. Choose shocks whose collapsed and extended lengths suit your lift height, and confirm the specifications with the manufacturer.
Should shocks be replaced in pairs?
Yes, replace both shocks on an axle together. Mixing new and worn dampers makes the two sides react differently, which affects handling and braking stability, especially on rough surfaces.















