Overview
The Pro Comp Suspension ES3000 318595 is a front hydraulic shock absorber for the 1995–2001 Ford Explorer, the 1995–2000 Ford Explorer Sport, the 2001–2004 Ford Explorer Sport Trac, the 1998–2011 Ford Ranger and the 1997–2001 Mercury Mountaineer. It mounts at the factory points, and its lengths are set to the vehicle.
The ES3000 is a twin tube cellular gas design with 10-stage velocity-sensitive valving. The 5/8 inch chrome-hardened piston rod and Teflon rebound stop support highway comfort and harder driving. The shock has double welded mounts and the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- Pro Comp Suspension limited lifetime warranty
Ford shock upkeep
Explorers and Rangers driven on rough roads and trails see frequent shock cycling, which heats and works the seals over time. Inspect the factory upper and lower mounts for cracked rubber, and check the shock body for oil. A worn shock often shows up as a rear end that bounces after a dip, a wandering feel on the highway or cupping on the tire tread.
The 5/8 inch rod and double welded mounts resist bending, but the surrounding parts still matter. Replace worn bushings and mounting hardware, and check the springs and sway bar links when the truck handles poorly. Because the rating is 0 in. of lift or drop, measure the ride height before fitting, and fit both fronts or both rears together so each side controls the body equally.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 318595 |
| UPC | 614901318593 |
| Shock series | ES3000 |
| Position | Front |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Lift height rating | 0 in. lift or drop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1995–2001 Ford Explorer (Eddie Bauer, Expedition, Limited, Postal, XL, XL Fleet, XLS and XLT), the 1995–2000 Ford Explorer Sport, the 2001–2004 Ford Explorer Sport Trac (Base, XL, XLS and XLT), the 1998–2011 Ford Ranger (Edge, FX4, Splash, Sport, Tremor, XL and XLT) and the 1997–2001 Mercury Mountaineer. Ford Explorers from 2002 and later and Ford Rangers from 1997 and earlier fall outside these ranges, so confirm fit for those years before ordering.
Ford Explorers from 2002 and later and Ford Rangers from 1997 and earlier are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lift rating is 0 in., lift or drop, so check the ride height on your truck before fitting. The mounts are factory, so the shock replaces the original at the same points.
What’s included
One ES3000 shock.
Not included: the dust boot.







