Select your vehicle

Pro Comp ES3000 Series Shock Absorber – 319502

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp ES3000 Series shock, part 319502, white finish
  • Vehicle-specific extended, collapsed and travel lengths
  • Factory upper and lower mounts
  • Hydraulic, non-adjustable, sold as each

Description

Overview

The Pro Comp Suspension ES3000 319502 is a hydraulic shock absorber from the ES3000 Series. Its extended, collapsed and travel lengths are set to the vehicle, and it uses the factory upper and lower mounts. The shock is finished in white and sold as each.

The ES3000 is a twin tube cellular gas design with 10-stage velocity-sensitive valving. A 5/8 inch chrome-hardened piston rod and a Teflon rebound stop are built into the shock, and the double welded mounts are intended for strength. Pro Comp covers the shock with its limited lifetime warranty. A shock’s damping sets how quickly the suspension settles after a bump, which is why valving and rod size are worth comparing across models.

Key features

  • Twin tube cellular gas design
  • 10-stage velocity-sensitive valving
  • 5/8 inch chrome-hardened piston rod
  • Teflon rebound stop
  • Double welded shock mounts
  • Factory upper and lower mounts
  • White finish
  • Pro Comp Suspension limited lifetime warranty

Factory mounts and fit

Factory-mounted shocks bolt into the points the original shock used, so they depend less on aftermarket brackets. The trade-off is that the length is matched to one vehicle, which means a shock for a different year or trim may bolt in and still ride differently. Before removing the old unit, measure it extended and collapsed and note the mount style.

A mismatch in stroke can bind the suspension at full compression or let it droop at rest. Damping and rod size matter less than getting the geometry right, so treat the mount points as the first thing to confirm.

  • Note the upper and lower mount style before removal
  • Keep the old shock until the new one is confirmed
  • Look for bent brackets at the factory mount points

Specifications

Brand Pro Comp Suspension
Part number 319502
UPC 614901040937
Shock series ES3000
Type Hydraulic, twin tube cellular gas design
Extended, collapsed and travel lengths Vehicle specific
Upper mount Factory
Lower mount Factory
Adjustable No
Remote reservoir No
Finish White
Boot included No
Sold as Each

Vehicle fitment

Confirm fit for your vehicle’s year, model and trim before ordering. Match the factory mounts and vehicle-specific lengths to the shock on your truck.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

One ES3000 shock.

Not included: the dust boot.

SKU: EXP319502 Category:

Specification

Shipping weight 4.95 lbs
Package dimensions 25.00 × 3.00 × 3.00 in
brands

Questions & Answers

Which vehicles take the Pro Comp ES3000 319502?

Fit depends on the vehicle, so confirm the make, model, year and trim before ordering. The shock uses factory mounts and vehicle-specific lengths, so compare it with the shock you are replacing.

Does the 319502 come with a boot?

No. The dust boot is not included. The shock is non-adjustable, with 10-stage velocity-sensitive valving and a 5/8 inch chrome-hardened piston rod.

Is the 319502 a front or rear shock?

Confirm whether your vehicle needs a front or rear shock before ordering. The shock uses factory upper and lower mounts with vehicle-specific lengths, so compare those points with your current unit.

Should shocks be replaced in pairs?

Replacing both shocks on the same axle is the usual approach. Pairing a new shock with a worn one can make the truck pull or ride unevenly, so both sides should share a similar age and condition.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon