Overview
The Pro Comp Suspension ES3000 318510 is a front hydraulic shock absorber for 1980 to 1996 Ford F-150, 1970 to 1983 Ford F-100 and 1983 to 1997 Ford Ranger trucks. It also fits the 1980 to 1996 Ford Bronco, the 1992 to 2000 Mitsubishi Montero and the 1961 to 1971 International Scout.
The shock measures 18.66 in extended and 11.52 in collapsed, with 7.14 in of travel. It has a stem at the top and a loop at the bottom and is rated for 0 to 1 in. of lift. It is a twin tube cellular gas design with 10-stage velocity-sensitive valving.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Stem upper mount and loop lower mount
- Rated for 0 to 1 in. of lift
- Pro Comp Suspension limited lifetime warranty
Setting up for older 4x4s
Older Ford trucks and Broncos often carry worn bushings, stretched shock mounts and tired springs, so a new shock can only work as well as the rest of the front end. Before fitting, inspect the stem mount for cracked rubber and check that the loop eye moves without play. A stem upper mount relies on its nut and washer to hold the shock in place, so replace any worn hardware rather than reusing it.
Extra travel gives a shock more room to control the suspension off road, especially on washboard roads and trail ruts. Keep the truck close to stock height when the shock is rated for only a small lift, and avoid loads heavier than the suspension was built for. Signs of a shock that needs replacing include leaking fluid, a soft feel on rebound, and a truck that keeps bouncing after bumps.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 318510 |
| UPC | 614901040777 |
| Shock series | ES3000 |
| Position | Front |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 18.66 in |
| Collapsed length | 11.52 in |
| Travel length | 7.14 in |
| Upper mount | Stem |
| Lower mount | Loop |
| Lift height rating | 0 to 1 in. of lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1990 Daihatsu Rocky (SE and SX), the 1980–1996 Ford Bronco, the 1970–1983 Ford F-100, the 1980–1996 Ford F-150, the 1993–1995 Ford F-150 Lightning, the 1970–1979 Ford F-250, the 1983–1997 Ford Ranger, the 1961–1971 International Scout and the 1992–2000 Mitsubishi Montero. For Ford trucks from 1998 and later, the 1997 and later F-150 and the Ford Explorer, confirm fit before ordering.
Ford trucks from 1998 and later, the 1997 and later F-150, and the Ford Explorer are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 0 to 1 in. lift rating points to trucks at or near stock height. Check the 18.66 in extended length against the shock you are removing before fitting it.
What’s included
One ES3000 shock.
Not included: the dust boot.











