Overview
The Pro Comp Suspension ES3000 317515 is a front hydraulic shock absorber for the 1997–2003 Ford F-150, the 1999–2003 Ford F-150 Lightning, the 1997–1999 Ford F-250 and the 1984–1995 Toyota Pickup. It is sold as a single shock, with a stem mount at the top and a loop mount at the bottom. Pro Comp rates it for a 6 in. lift.
The ES3000 is a twin tube cellular gas design that provides a comfortable highway ride and can handle demanding off-road driving. Its 10-stage velocity-sensitive valving changes damping with how fast the suspension moves, so the shock responds to both pavement and rough trail sections.
Key features
- Twin tube cellular gas design for highway comfort and off-road use
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Stem upper mount and loop lower mount
- Non-adjustable hydraulic damping
- Covered by the Pro Comp Suspension limited lifetime warranty
Highway and trail balance
A shock tuned for highway comfort and trail control has to handle two different speeds of suspension movement. Velocity sensitive valving is meant to firm up when the suspension moves quickly over rough ground and soften over slow, smooth surfaces, which lets one shock cover both kinds of driving.
Choosing a shock for a truck used mostly on the road or mostly on rough trails affects how the damping feels day to day. A non-adjustable shock keeps that balance fixed, so the setup should match how the truck is driven rather than expecting to change it later.
Front shocks often wear before rear ones because they take more of the steering and braking load. Replace worn front shocks in pairs, and check the mounting hardware for looseness after the first drive. Loose hardware can cause noise and uneven tire wear.
- Consider how the truck is mostly driven
- Replace front shocks as a pair
- Inspect mounting hardware after the first drive
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 317515 |
| UPC | 614901040593 |
| Shock series | ES3000 |
| Position | Front |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 17.08 in |
| Collapsed length | 10.58 in |
| Travel length | 6.50 in |
| Upper mount | Stem |
| Lower mount | Loop |
| Lift height rating | 6 in. lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1997–2003 Ford F-150 (Base, Harley-Davidson Edition, King Ranch, Lariat, XL and XLT), the 1999–2003 Ford F-150 Lightning, the 1997–1999 Ford F-250 (Base, Lariat, XL and XLT) and the 1984–1995 Toyota Pickup (Base, DLX, SR5 and SR5 Turbo).
Other F-150 and F-250 years, including the 1980–1996 F-150 and the 2004 and newer F-150, are not on this list, and neither is the Ford Ranger. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The ES3000 is rated for a 6 in. lift, so it suits a truck with about that much suspension height. Compare the 17.08 in extended and 10.58 in collapsed lengths with the shock you are replacing before you fit it. Use jack stands and a safe lifting method when working under the truck.
What’s included
One ES3000 shock absorber, sold as a single unit.
Not included: the dust boot.












