Overview
The Pro Comp ES3000 Series Shock Absorber, part number 319510, is a front shock with loop mounts at both ends, sized for a 3 in. lift. It fits the 1984–1990 Ford Bronco II, the 1977–1996 Ford F-150, the 1983–1988 Ford Ranger and the 1971–1980 International Scout II, among other years.
The ES3000 is a twin tube cellular gas design with 10 stage velocity sensitive valving that adjusts to road conditions. It has a 5/8 inch chrome hardened piston rod, a Teflon rebound stop and double welded shock mounts for strength. It carries a limited lifetime warranty.
Key features
- 10 stage velocity sensitive valving
- 5/8 in. chrome hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Loop upper and lower mounts
- Limited lifetime warranty from Pro Comp Suspension
Lift height and shock length
A suspension lift raises the axle relative to the frame, which means the shock has to reach a different distance to control the wheel. Shocks that are too short can bottom out and wear mounts quickly, while shocks that are too long can bind when the suspension droops. A lift height is a useful starting point for comparing lengths.
Front shocks do their best work when both sides are matched and the mounts are tight and free of wear. Inspect the mounts, bushings and bolts whenever the shock is removed, and check the steering components for play after the lift. A wheel alignment after any height change helps tires wear evenly.
- Measure old shock lengths before ordering
- Compare travel with the suspension’s range
- Inspect mounts and bushings during removal
- Set alignment after any height change
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 319510 |
| UPC | 614901040999 |
| Shock series | ES3000 |
| Position | Front |
| Lift height | Designed for a 3 in. lift |
| Extended length | 19.84 in. |
| Collapsed length | 12.32 in. |
| Travel | 7.52 in. |
| Upper mount | Loop |
| Lower mount | Loop |
| Adjustable | No |
| Remote reservoir | No |
| Hydraulic or gas charged | Twin tube cellular gas design; confirm the charge type before ordering |
| Valving | 10 stage, velocity sensitive |
| Piston rod | 5/8 in., chrome hardened |
| Shock finish | White |
| Boot included | No |
| Quantity | Each |
Vehicle fitment
It fits the 1984–1990 Ford Bronco II, the 1980–1983 Ford F-100, the 1977–1996 Ford F-150, the 1993–1995 Ford F-150 Lightning, the 1980 Ford F-250, the 1983–1988 Ford Ranger and the 1971–1980 International Scout II. Fit is by model year, so match the year exactly.
The list does not include the Ford Ranger after 1988, the F-150 from 1997 onward, or the F-250 after 1980. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the 19.84 in. extended and 12.32 in. collapsed lengths against your current mounts before installing, since the travel is 7.52 in.
Support the vehicle securely before removing the old shock.
What’s included
The boot is not included. Check whether mounting hardware is needed before starting the installation.











