Overview
The Pro Comp 318546 is an ES3000 Series twin tube shock absorber with an 18.59 inch extended length, 6.72 inch of travel and loop mounts at both ends. Match its lengths and mount style to the shock being replaced.
The shock is a twin tube cellular gas design with 10 stage velocity sensitive valving, which Pro Comp says adjusts to road conditions and improves handling. It uses a 5/8 inch chrome hardened piston rod, a Teflon rebound stop and double welded shock mounts.
The ES3000 suits highway comfort as well as demanding off-road driving.
Key features
- Twin tube cellular gas design
- 10 stage velocity sensitive valving
- 5/8 inch chrome hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- White finish, not adjustable, no remote reservoir
Measuring before you buy
A replacement shock has to match the installed length and stroke of the one it replaces. The extended length is the distance between mounts when the shock is fully stretched, and the collapsed length is the distance when it is fully compressed. The difference between them is the travel, which controls how far the suspension can move before it runs out of room.
Measure the current shock from center to center of each mount with the vehicle supported and the wheels hanging, then compare those figures with the new unit. Check the mount style on both ends, the bushing or eye size and the rod diameter. A shock that is close in length may still fail to fit if the mounts do not match the vehicle’s brackets.
- Measure center to center at each mount
- Compare mount style at both ends
- Note the rod diameter and finish
- Confirm boot needs before ordering
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 318546 |
| UPC | 614901695618 |
| Series | ES3000 |
| Extended length | 18.59 inch |
| Collapsed length | 11.87 inch |
| Travel | 6.72 inch |
| Upper mount | Loop |
| Lower mount | Loop |
| Piston rod | 5/8 inch, chrome hardened |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Compare the 11.87 inch collapsed length, the 18.59 inch extended length and the loop mounts with the shock you are replacing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The mounted length has to fall between the 11.87 inch collapsed length and the 18.59 inch extended length, with 6.72 inch of travel. Measure the current shock before ordering.
What’s included
A single shock absorber. No boot is included.








