Overview
The Pro Comp Suspension ES3000 319500 is a rear hydraulic shock absorber with loop mounts at both ends. It fits the 1984–2001 Jeep Cherokee XJ, the 1997–2006 Jeep Wrangler TJ, the 2004–2006 Jeep Wrangler LJ Unlimited, the 1976–1981 Jeep CJ5 and CJ7, the 1992–2000 Isuzu Trooper and the 1995–2004 Toyota Tacoma.
The shock is 19.84 in extended and 12.32 in collapsed, with 7.52 in of travel. Pro Comp rates it for 0 to 1 in. of lift, so it suits trucks at or near stock height. The ES3000 is a twin tube cellular gas design with 10-stage velocity-sensitive valving, and it carries the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Loop upper and lower mounts
- Rear position
- Pro Comp Suspension limited lifetime warranty
Before you buy
A rear shock controls how quickly the rear axle settles after a bump, and it works alongside the springs rather than replacing them. When the old shock is worn, the truck may bounce after bumps, feel loose on washboard roads or show fluid down the body. Replacing one shock at a time can leave the two sides uneven, so many owners change both rear shocks together.
Bump stops and worn bushings at the loop mounts are often inspected at the same time, because a tired bushing can make a new shock feel noisy. If the truck regularly carries extra weight, damping matters more, so think about the load you normally haul before choosing a shock.
- Check both rear shocks for leaks and mount wear
- Inspect the loop bushings for cracks before installing
- Replace bump stops that are split or compressed
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 319500 |
| UPC | 614901040890 |
| Shock series | ES3000 |
| Position | Rear |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 19.84 in |
| Collapsed length | 12.32 in |
| Travel length | 7.52 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Lift height rating | 0 to 1 in. of lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1967–1972 Chevrolet C10 Suburban, the 1968–1972 GMC C15 and C1500 Suburban, the 1992–2000 Isuzu Trooper (LS, Limited, Ltd, RS, S and SE), the 1999–2000 Isuzu VehiCROSS, the 1984–2001 Jeep Cherokee (XJ), the 1976–1981 Jeep CJ5 and CJ7, the 1984–1990 Jeep Wagoneer (SJ), the 2004–2006 Jeep Wrangler (LJ) Unlimited, the 1997–2006 Jeep Wrangler (TJ), the 1989–1991 Mitsubishi Montero, the 1989–1990 Mitsubishi Montero Sport and the 1995–2004 Toyota Tacoma. Check fit for Jeep Wrangler JK and JL models and for years outside those above before ordering.
Jeep Wrangler JK and JL models, the Jeep Grand Cherokee and Wrangler generations outside the years above are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a rear shock with a 0 to 1 in. lift rating, so it is meant for trucks and Jeeps at or near stock height. Compare the 19.84 in extended and 12.32 in collapsed lengths with your current shock before fitting. Support the vehicle on stands before working under it.
What’s included
One ES3000 shock.
Not included: the dust boot.











