Overview
The Pro Comp Suspension ES3000 319514 is a hydraulic shock absorber from the ES3000 Series. Its extended, collapsed and travel lengths are vehicle specific, and it uses the factory upper and lower mounts.
The ES3000 is a twin tube cellular gas design with 10-stage velocity-sensitive valving. It has a 5/8 inch chrome-hardened piston rod, a Teflon rebound stop and double welded mounts, and it carries the Pro Comp Suspension limited lifetime warranty. Because the lengths are vehicle specific, the stroke is matched to the truck it is sold for. The shock has no adjuster, so nothing needs setting at installation.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- White finish
- Pro Comp Suspension limited lifetime warranty
Stroke, mounts and replacement
Vehicle-specific lengths mean the stroke is set for the truck the shock is sold for, so the replacement should cover the same travel as the original. Measuring the old shock at both mounts before ordering prevents a surprise at installation. Count the travel from full compression to full extension, since a short stroke can bottom out on rough roads.
Factory upper and lower mounts make the swap simpler, but they only work well when the bushings, bolts and brackets are sound. Worn bushings let the shock move off its axis and shorten its life. Because this shock has no adjuster, a worn shock is best replaced rather than set. Replacing shocks in pairs on the same axle keeps the ride and handling balanced from side to side.
- Measure the stroke at both mounts before ordering
- Inspect factory bushings and brackets
- Replace in pairs on the same axle
- Add a dust boot if the old one is worn
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 319514 |
| UPC | 614901694185 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Fit depends on your vehicle’s year, model and trim, so confirm fit before ordering. Compare the factory mounts and vehicle-specific lengths with the shock you are replacing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One ES3000 shock.
Not included: the dust boot.











