Select your vehicle

Pro Comp ES3000 Series Shock Absorber – 319520

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp ES3000 Series shock, part 319520, white finish
  • Vehicle-specific lengths and factory mounts
  • Described by Pro Comp as universal fit, so check the lengths before ordering
  • Hydraulic, non-adjustable, sold as each

Description

Overview

The Pro Comp Suspension ES3000 319520 is a hydraulic shock absorber from the ES3000 Series. Its extended, collapsed and travel lengths are vehicle specific, and it uses the factory upper and lower mounts. Because the length must suit the vehicle, measure the shock it replaces before ordering.

The ES3000 is a twin tube cellular gas design with 10-stage velocity-sensitive valving. The 5/8 inch chrome-hardened piston rod and Teflon rebound stop are meant for comfortable highway driving and demanding use, and the double welded mounts carry the Pro Comp Suspension limited lifetime warranty.

Key features

  • Twin tube cellular gas design
  • 10-stage velocity-sensitive valving
  • 5/8 inch chrome-hardened piston rod
  • Teflon rebound stop
  • Double welded shock mounts
  • Factory upper and lower mounts
  • White finish
  • Pro Comp Suspension limited lifetime warranty

Before you buy

Shock absorbers control how quickly the suspension rebounds and compresses after a bump, so a replacement should match the original in length, mount style and travel. When the lengths are vehicle specific, the old shock becomes the most useful reference. Measure its extended and collapsed lengths and note how the mounts sit before comparing parts. Small differences in length can change ride height, limit travel, or put the shock under strain at full extension.

Worn shocks often show oil on the body, leaks near the seal, a bouncy or floating ride, or uneven tire wear. Replace them in pairs on the same axle so both sides damp evenly. If the truck has been lifted or carries heavier loads, check that the new shock still has room to move through its full travel before tightening the mounts.

Specifications

Brand Pro Comp Suspension
Part number 319520
UPC 614901041057
Shock series ES3000
Type Hydraulic, twin tube cellular gas design
Extended, collapsed and travel lengths Vehicle specific
Upper mount Factory
Lower mount Factory
Adjustable No
Remote reservoir No
Finish White
Boot included No
Sold as Each

Vehicle fitment

Confirm fit for your vehicle’s year, model and trim before ordering. Compare the vehicle-specific lengths and factory mount points with your current shock.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

One ES3000 shock.

Not included: the dust boot.

SKU: EXP319520 Category:

Specification

Shipping weight 5.00 lbs
Package dimensions 25.00 × 3.00 × 3.00 in
brands

Questions & Answers

Is the Pro Comp ES3000 319520 truly universal fit?

The shock uses factory mounts and vehicle-specific lengths, so it does not suit every truck. Compare the mount points and length with your current shock before ordering.

What is the adjustability of the 319520?

It is non-adjustable. The shock is a hydraulic twin tube cellular gas design with 10-stage velocity-sensitive valving. The dust boot is not included.

What position is the 319520?

Confirm the mounting position for your vehicle before ordering. Compare the extended and collapsed lengths with your current shock, since they are vehicle specific.

How can I tell if this shock needs replacing?

Look for oil leaking down the body, a bouncy or floating ride, or uneven tire wear. Check the mounts for cracks or looseness as well, since a worn bushing can mimic a bad shock. Replace shocks in pairs on the same axle.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon