Overview
The Pro Comp Suspension ES3000 318514 is a front hydraulic shock absorber for the 1986–1995 Toyota 4Runner, the 1986–1995 Toyota Pickup and the 1993–1998 Toyota T100. Pro Comp rates it for a 4 in. lift, so it is intended for trucks with that much suspension height.
The shock measures 18.66 in extended and 11.52 in collapsed, with 7.14 in of travel. A stem sits at the top and a loop at the bottom. It is a twin tube cellular gas design with 10-stage velocity-sensitive valving, and the Teflon rebound stop and 5/8 inch chrome-hardened piston rod suit demanding driving.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Stem upper mount and loop lower mount
- Rated for a 4 in. lift
- Pro Comp Suspension limited lifetime warranty
Toyota lift and stance
Lift height changes the geometry of the suspension, so a shock matched to a 4 in. lift sits at a different angle than a stock one. Before fitting, look at the ride height on all four corners and make sure the front is not sitting noticeably higher than the rear, since uneven heights can stress the mounts and steering. Stems and loop eyes should be checked for cracks, rust and worn bushings.
Toyota trucks from this era often keep their original bushings, so inspection matters. Replace the front pair together so the truck handles evenly, and get an alignment after any suspension change. Signs the old shock is worn include oil on the body, clunking over bumps and a body that keeps bouncing after a dip. Work on stands, not just a jack, when disconnecting the old unit.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 318514 |
| UPC | 614901040791 |
| Shock series | ES3000 |
| Position | Front |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 18.66 in |
| Collapsed length | 11.52 in |
| Travel length | 7.14 in |
| Upper mount | Stem |
| Lower mount | Loop |
| Lift height rating | 4 in. lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1986–1995 Toyota 4Runner (DLX and SR5), the 1986–1995 Toyota Pickup (Base, Base Turbo, DLX, SR5 and SR5 Turbo) and the 1993–1998 Toyota T100 (Base, DLX, DX and SR5). Toyota 4Runners and Pickups from 1996 and later and T100 models from 1999 and later call for a fit check. Confirm your vehicle’s year, model and trim before ordering.
Toyota 4Runners and Pickups from 1996 and later and the 1999 and later T100 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
At a 4 in. lift rating, this shock is meant for a Toyota with a matching suspension height. Confirm the lift on your truck before ordering, and compare the 18.66 in extended and 11.52 in collapsed lengths with your current shock. Lift the truck only with a jack and stands rated for its weight.
What’s included
One ES3000 shock.
Not included: the dust boot.











