Overview
The Pro Comp Suspension ES3000 319509 is a hydraulic shock absorber from the ES3000 Series. Its lengths are set to the vehicle, and it uses the factory upper and lower mounts. The shock is finished in white.
The ES3000 is a twin tube cellular gas design. Its 10-stage velocity-sensitive valving responds to road conditions, and the 5/8 inch chrome-hardened piston rod and Teflon rebound stop support both highway driving and harder use. Double welded mounts and the Pro Comp Suspension limited lifetime warranty round out the design. Because the mounts are factory, the design works at the points the original shock used.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- Pro Comp Suspension limited lifetime warranty
Measuring for a good fit
Measuring the shock you are replacing is the surest step before ordering. Take the extended length and collapsed length between the mount centers, then note the stem or loop style at each end. Because factory mounts reuse the original points, a shock that is even slightly off in length can alter the damping geometry and wear the bushings early.
A twin tube cellular gas shock with 10-stage velocity-sensitive valving is a sealed unit, so the rod, seals and body should be checked for damage before installation. Inspect the piston rod for pitting, look for oil on the body and make sure the rebound stop is intact. Dust boots are not included with this shock, so reuse or source one if the old boot is damaged.
- Measure length between mount centers at both ends
- Check piston rod for pitting or bends
- Inspect factory bushings and bolts
- Reuse or source a boot if the old one is cracked
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 319509 |
| UPC | 614901040975 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
The 319509 is not tied to a named make, model or year. Compare the factory mount points and vehicle-specific lengths with your current shock before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One ES3000 shock.
Not included: the dust boot.











